Z0405ME 1AA2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are solid-state switches that are used to control the flow of power in electronic systems and in many industrial applications. A TRIAC, or triode for alternating current, is a form of thyristor which allows for bidirectional current flow. The Z0405ME 1AA2 is a surface mount TRIAC with a maximum rated current of 4A at 400V.

The Z0405ME 1AA2 TRIAC has two main application fields. The first is for the power control of AC voltages, such as heating and ventilation systems and motor controls. The second is for the use of snubber circuits to reduce overvoltage and inductive kick-back on outputs with abrupt changes in load such as in relays and switches.

The working principle of the Z0405ME 1AA2 TRIAC is quite straightforward. It is composed of two layers of semiconductor material, which share a common cathode. It is constructed so that the complimentary switches in each layer have their main current carrying terminals connected together. When the control voltage of the cathode is raised, it triggers an avalanche breakdown, creating conduction paths through both layers of the device.

When in the on state, the TRIAC will remain in conduction until the current falls below a certain level, known as the holding current. The main current flow is then interrupted until the main current is increased to the break-over point, which is the point at which the TRIAC will again start to conduct. This is controlled by the voltage at the gate, which acts like a switch to control the main current.

The Z0405ME 1AA2 is rated for 4A at 200-400V. It is also equipped with surge current protection, over-temperature shutdown, and a stand-off voltage of 3300V between gate and main terminals. This device can operate at a maximum junction temperature of +175 degrees Celsius and has a non-repetitive surge current rating of 16A.

In summary, the Z0405ME 1AA2 is a surface mount TRIAC rated for 4A at 400V. It is used for power control in AC circuits such as heating and ventilation systems, motor controllers, and snubber circuits to reduce overvoltage. Its working principle is based on two layers of semiconductors sharing a common cathode, which when triggered by a voltage applied to the control gate, creates a conduction path for current to flow.

The specific data is subject to PDF, and the above content is for reference