( 1 ) Frequency response is refers to the characteristics of the output voltage of the secondary side of the transformer varying with the operating frequency.

( 2 ) If the output voltage of the transformer at intermediate frequency is U. When the output voltage ( the input voltage remains the same ) drops to 0.707 U. The frequency range is called the passband B of the transformer.

( 3 ) The initial and secondary impedances of the transformer are connected to the appropriate impedances Ro and Ri to match the primary and secondary impedances of the transformer. The ratio of Ro to Ri is called the primary and secondary impedance ratio. In the case of impedance matching, the transformer operates at its optimum state and has the highest transmission efficiency.

( 4 ) The rated power is expressed in figures directly, except for the audio frequency transformer.

( 5 ) The serial number is digitally expressed. Note : the transformer model here does not contain any special transformer such as intermediate frequency transformer, row output transformer and so on.

If you want to know more, our website has product specifications for the transformers, you can go to ALLICDATA ELECTRONICS LIMITED to get more information.

Pulse transformer:ALT3232M-151-T001