100PK100MEFCT810X16

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are energy storage components and are used in a wide variety of applications. The 100PK100MEFCT810X16 is a type of Aluminum Electrolytic Capacitor that is used in many commercial, industrial, and consumer products. This article will discuss the application field and working principle of the 100PK100MEFCT810X16.The 100PK100MEFCT810X16 is a radial lead Aluminum Electrolytic Capacitor with a rated operating temperature range of -25°C up to 85°C. The voltage rating for this component is 25V DC. It has a low equivalent series resistance (“ESR”) and is capable of handling high ripple current demands. The 100PK100MEFCT810X16 is available with two capacitance values, 100 μF and 10 μF, and with two lead diameters, 0.25 inch and 0.5 inch.The 100PK100MEFCT810X16 is suitable for electric power applications such as power line filters, home power supplies, and industrial control systems. It is also suitable for communications and medical systems, especially for applications that require high levels of ripple current handling. Additionally, this component can be used in applications where high current and high frequency are required, such as LCD displays, power supplies, LED lights, and solar cells.The working principle of the 100PK100MEFCT810X16 is based on the principle of charge storage. In this type of capacitor, a thin dielectric is placed between two metal plates. When a voltage is applied, the dielectric becomes polarized and charges accumulate on the metal plates. This creates an electric field which stores an electric charge between the metal plates. This charge is known as the capacitance, and is measured in Farads. The capacitance of the 100PK100MEFCT810X16 is 100 μF and 10 μF.When the DC voltage is applied to the capacitor, a small amount of current passes through it until the internal resistance of the capacitor is equal to the resistor connected in series. At this point, the voltage will stop increasing and the capacitor will be fully charged. The total charge stored in the capacitor is a function of the capacitance, C, and the voltage, V. The equation for this is Q = CV.When the voltage is removed from the capacitor, the stored charges will begin to dissipate. This is known as the discharge time constant. This time constant is dependent upon the internal resistance of the capacitor, the capacitance value, and the applied voltage. The time constant for the 100PK100MEFCT810X16 is typically around 4.5 milliseconds for a capacitance of 100 μF and a voltage of 25V DC.Overall, the 100PK100MEFCT810X16 is a versatile component that is suitable for many applications, due to its low ESR and high ripple current handling capabilities. It is suitable for use in electric power applications, communications systems, and medical systems, as well as other applications where high current or high frequency is required. The working principle of this component is based on the principle of charge storage, and the total charge stored in the capacitor is a function of the capacitance and the applied voltage.

The specific data is subject to PDF, and the above content is for reference