108KXM010MLQ

Series:	KXM
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	1000µF
Tolerance:	±20%
Voltage - Rated:	10V
ESR (Equivalent Series Resistance):	315 mOhm @ 120Hz
Lifetime @ Temp.:	4000 Hrs @ 105°C
Operating Temperature:	-55°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	Bypass, Decoupling
Ripple Current @ Low Frequency:	858mA @ 120Hz
Ripple Current @ High Frequency:	1.43A @ 100kHz
Impedance:	63 mOhms
Lead Spacing:	0.197" (5.00mm)
Size / Dimension:	0.394" Dia (10.00mm)
Height - Seated (Max):	0.689" (17.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum Electrolytic Capacitors are components used in many electronic applications including pulse amplification applications. They have a wide range of values, from the microscopic size of 0.1 microfarad to the larger sizes of up to several thousand microfarads. The 108KXM010MLQ Aluminum Electrolytic Capacitor is one of the larger values available.

Specifications and Features

The 108KXM010MLQ has capacitance of 10,000uF, voltage of 35 volts and a rated temperature of 80 degrees Celsius. It features a radial leaded form factor and can be used in both low and high temperature applications. It is designed for use in board level applications and has a low impedance which makes it highly efficient in temperature stable environments.

Operation

An Aluminum Electrolytic Capacitor has two electrodes on either side of a specially formulated liquid dielectric material. This dielectric material enables the capacitor to store electrical energy and is the most important factor in its operation. When current is passed through the capacitor, electrical energy is stored in the dielectric material which then acts as an insulator and prevents the electricity from being discharged.

Application Field

The 108KXM010MLQ Aluminum Electrolytic Capacitor is suitable for a wide range of applications including pulse and filter circuit design, audio amplifier design, power supplies, LED lighting, motor and generator applications, and general electronics. Its high capacitance and low impedance enable it to be used in applications which require high levels of energy storage and discharge.

Working Principle

When the capacitor is placed in a circuit, charges start flowing in and out of it. This is known as a charging cycle. The capacitor stores the charges in its dielectric material which acts as an insulator. During the process of charging and discharging, electrical energy is transferred between the electrodes. This energy can then be used for powering different circuits or devices.

Conclusion

The 108KXM010MLQ Aluminum Electrolytic Capacitor is a cost-effective component for high-performance applications which require high energy storage and discharge. It has a high capacitance and low impedance which enables it to be used in low and high temperature applications. It is designed for board level applications and is suitable for a wide range of electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description