10BQ015

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	15V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	350mV @ 1A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	500µA @ 15V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	DO-214AA, SMB
Supplier Device Package:	SMB
Operating Temperature - Junction:	-55°C ~ 125°C
Base Part Number:	10BQ015

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 10BQ015 Single Rectifier

The 10BQ015 single rectifier is a high performance rectifier developed by All semiconductor, a well established and highly respected semiconductor company. The 10BQ015 is designed to provide efficient, low-cost rectification of alternating current (AC), in order to convert it into direct current (DC). This rectifier is ideal for applications that require high performance and/or high speed rectification, such as power conversion for computer and video systems, motor drives, and most other general-purpose rectification needs.

Main Features of 10BQ015 Single Rectifier

The 10BQ015 single rectifier offers several valuable features, including:

• – A low maximum forward voltage drop of 1.28 V and low maximum reverse current of 4 mA.
• – An operating frequency up to 100 kHz.
• – A maximum peak repetitive reverse voltage of 600 V.
• – A higher power dissipation than competing products.
• – A maximum thermal resistance of 80 °C / Watt.

Applications of 10BQ015 Single Rectifier

The 10BQ015 single rectifier offers several potential applications, including:

• – Power conditioning and power conversion for computer and video systems.
• – Switched-mode power supplies.
• – Cellular telephone power supplies.
• – Power-over-Ethernet (PoE) systems.
• – Motor drives.
• – Car battery charging systems.
• – Uninterruptible power supplies (UPS).

Mode of Operation of 10BQ015 Single Rectifier

The 10BQ015 single rectifier operates in one of two modes: discontinuous or continuous conduction mode (CCM). In CCM, the rectifier operates at a constant current level and is typically used when load current is relatively low (e.g., under 100mA). In discontinuous conduction mode (DCM), the rectifier operates at a constant voltage level and is typically used when load current is relatively high (e.g., over 100mA).

Working Principle of 10BQ015 Single Rectifier

The 10BQ015 single rectifier converts alternating current (AC) into direct current (DC) by allowing current to flow only in one direction. This process is known as rectification, and it involves the use of diodes. The diodes act as one-way valves, allowing current to flow in the forward direction and blocking current in the reverse direction. The 10BQ015 rectifier also uses capacitors to filter out any noise or ripple in the DC output, resulting in a smooth, steady DC current.

Conclusion

The 10BQ015 single rectifier from All Semiconductor is a high-performance rectifier designed for power conversion applications. It offers a low maximum forward voltage drop, high frequency operation, and high power dissipation. It is suitable for use in power conditioning, PoE systems, motor drives, car battery charging systems, and UPS systems. The 10BQ015 single rectifier operates in two modes, CCM and DCM, depending on load current. In both modes, diodes are used to allow current to flow in only one direction, and capacitors are used to filter any noise or ripple in the output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description