10WA470MEFCT78X9

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.413" (10.50mm)
Size / Dimension:	0.315" Dia (8.00mm)
Lead Spacing:	0.138" (3.50mm)
Ripple Current @ High Frequency:	456mA @ 10kHz
Ripple Current @ Low Frequency:	380mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	WA
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	2000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	10V
Tolerance:	±20%
Capacitance:	470µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors are specifically designed electronic components with a wide variety of applications in many different industries. They consist of an anode composed of aluminum oxide, and a cathode composed of aluminum foil. The aluminum oxide acts as an electrolyte between the two plates, allowing current to flow freely, and also providing an electric field for the capacitor. This electric field forms the basis of the capacitance of the capacitor, which determines the amount of energy that can be stored and released.The 10WA470MEFCT78X9 is an example of a type of aluminum electrolytic capacitor. This capacitor is typically used in power electronics applications, due to its very high capacitance and energy storage capacity. It is ideal for use in switch-mode power supplies, motor controllers, and many other applications.The 10WA470MEFCT78X9 has a rated capacitance of 470 μF, and a voltage rating of 63Vdc. It has a maximum ripple current rating of 10A, and a maximum operating temperature of 85°C. It is designed for use with snap-in mounting for easy installation, and has a long life of up to 10,000 hours at rated voltage and temperature.The working principle of the 10WA470MEFCT78X9 is based on the principle of a parallel-plate capacitor. The two aluminum plates, the anode and the cathode, are separated by the aluminum oxide electrolyte. When a potential difference is applied across the capacitor, an electric field is created, which induces charge on the plates, resulting in a capacitance. As the potential difference increases, the capacitance increases proportionately.As the 10WA470MEFCT78X9 is designed for power electronics applications, it is important to take into account the fact that these capacitors handle high currents and voltages, and therefore require careful consideration of the parameters of the design. The voltage rating of the capacitor should never be exceeded, as this can result in failure of the components. It is also important to consider other factors such as ripple current rating, temperature rating, and mounting requirements, in order to ensure the safety and reliable operation of the capacitor.In general, aluminum electrolytic capacitors are widely used in applications that require high capacitance and energy storage capabilities, such as switch-mode power supplies, motor controllers, inverters, and more. They are also extremely reliable over long life cycles, and are relatively easy to mount and install. The 10WA470MEFCT78X9 in particular is designed for use in power electronics applications, and provides superior reliability and performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description