10ZL1000MEFC10X16

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.689" (17.50mm)
Size / Dimension:	0.394" Dia (10.00mm)
Lead Spacing:	0.197" (5.00mm)
Impedance:	38 mOhms
Ripple Current @ High Frequency:	1.43A @ 100kHz
Ripple Current @ Low Frequency:	858mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	ZL
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	4000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	10V
Tolerance:	±20%
Capacitance:	1000µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are a type of capacitor that utilizes an oxide formed on an aluminum anode as the working dielectric material that enables it to store and release energy to and from an electric circuit. They are one of the most common capacitors used in electronics and electrical engineering and are often found in everyday electronic devices. The 10ZL1000MEFC10X16 is a subcategory of aluminum electrolytic capacitor and is commonly used for applications such as power supplies, signal filtering, and audio/video equipment. The 10ZL1000MEFC10X16 is a capacitor that is designed for a wide variety of applications and is often used as a general-purpose capacitor. It is constructed with an anode heat sink and a polyester film dielectric. The anode heat sink helps to dissipate the heat from the capacitor and protect it from damage. The polyester film dielectric helps to maintain a high capacitance value. Additionally, the 10ZL1000MEFC10X16 utilizes an electrolyte to help reduce the loss of energy stored in the capacitor. This reduces the power required to charge and discharge the capacitor, and increases the capacitor’s efficiency.The 10ZL1000MEFC10X16 is rated for a long service life and has the ability to store up to 1000 microfarads of energy. The number after the ZL stands for the maximum operating voltage that can be tolerated by the capacitor without damaging it. A typical application for the 10ZL1000MEFC10X16 is in power supplies where they are used to filter the incoming direct current or to store energy for later use in the power supply. The 10ZL1000MEFC10X16 is also used in audio equipment, such as amplifiers or speakers, as a low-pass filter. This helps to reduce the distortion of the signal by eliminating the higher-frequency components of the signal. Additionally, it is used in pulse-width modulation circuits where its variable capacitance helps with the modulation of a signal. Finally, it can also be used as an input filter in oscillators to help reduce the noise from outside sources and help to maintain a more consistent output signal.The working principle of the 10ZL1000MEFC10X16 is similar to any other aluminum electrolytic capacitor. The dielectric layer formed on the anode allows for the capacitor to hold its charge, while the electrolyte helps to increase the capacitor’s efficiency. The 10ZL1000MEFC10X16 is able to store and release energy from an electric circuit, and can be used in a variety of applications such as power supplies, signal filtering, and audio/video equipment. The 10ZL1000MEFC10X16 is a versatile capacitor that is able to store and release energy to and from an electric circuit. It is a reliable unit that can be used in a variety of applications, such as power supplies, signal filtering, and audio/video equipment. The 10ZL1000MEFC10X16 utilizes an electrolyte to help reduce the power required to charge and discharge the capacitor, and its anode heat sink helps to dissipate the heat generated by the capacitor. With its long service life and variable capacitance, the 10ZL1000MEFC10X16 is an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description