10ZLG100MEFCT15X11 Capacitors

Series:	ZLG
Packaging:	Tape & Box (TB)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	100µF
Tolerance:	±20%
Voltage - Rated:	10V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	2000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	109.35mA @ 120Hz
Ripple Current @ High Frequency:	405mA @ 100kHz
Impedance:	150 mOhms
Lead Spacing:	0.079" (2.00mm)
Size / Dimension:	0.197" Dia (5.00mm)
Height - Seated (Max):	0.492" (12.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

One of the most common electrical components used in a wide range of electronic and electrical applications are aluminum electrolytic capacitors. These capacitors are used to block, store, and release electrical energy, allowing currents to flow through a circuit when needed. A capacitor consists of two metallic plates that are separated by a dielectric material. When electric charge is applied to the plates, the trapped electrical energy is converted into an electric field.The 10ZLG100MEFCT15X11 caps are primarily constructed from aluminium and often use a conductive polymer as an electrolyte. The aluminium is etched to form a huge number of small plates, each with its own tiny capacity. The aluminium foil is polarized for electrolytic capacitors, which means the orientation of conductive plates affects the behaviours of the capacitor. The capacitance is determined by the surface area of each aluminium layer, which effectively increases the total capacitive value of the capacitor.The 10ZLG100MEFCT15X11 capacitor has a voltage rating of 100 voltage. This voltage rating is crucial for most applications, as it must be higher than the voltage of the power source or the electronic components connected to the capacitor. The 10ZLG100MEFCT15X11 caps also have a maximum working temperature of 85°C, so they are often used in temperature conditions where other capacitors would fail.The 10ZLG100MEFCT15X11 capacitors can be used in a variety of applications, including motor drives, power supplies, switch-mode power supplies, automotive systems, consumer electronics, and many more. The capacitors are often used to store and filter out noise and disturbances from the power source. In general, aluminium electrolytic capacitors reduce ripple current, suppresses noise and lets users save board space by providing higher capacitance.In addition, the 10ZLG100MEFCT15X11 capacitors are also helpful for reduced start-up delays and improved energy efficiency in applications like energy storage and power conversion. These capacitors also provide a low equivalent series resistance (ESR). The low ESR of the 10ZLG100MEFCT15X11 capacitor helps to reduce the noise levels and improve the ripple current reduction and load current damping performance as well.The 10ZLG100MEFCT15X11 caps also offer improved reliability, thanks to their low failure rates. These capacitors have a wide operating temperature range, which allows them to be used in extreme environments and in temperature changes up to -55 to +125 degrees Celsius. The capacitors are also resistant to vibration, shock, and humidity. Overall, the 10ZLG100MEFCT15X11 aluminum electrolytic capacitors are great for a variety of applications due to their high capacitance, low equivalent series resistance (ESR) and high temperature rating. They offer a number of crucial advantages, including improved performance, more reliability and extended lifetimes. With these advantages, the 10ZLG100MEFCT15X11 aluminum electrolytic capacitors are a popular choice for many electronic and electrical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description