160YXF22MEFC10X20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are an important component in electronics due to their ability to store electrical energy. They are versatile and efficient, making them ideal for use in a variety of applications. The 160YXF22MEFC10X20 model is a type of capacitor specifically designed for power electronic applications. This section will provide an overview of the application field and working principles of this model.

Applictaion Field of 160YXF22MEFC10X20

The 160YXF22MEFC10X20 capacitor model is designed for power electronics applications, which include motor drives, pulse power systems, switchmode power supplies, high power RF transmitters and high power audio amplifiers. It has a capacitance of 1.800µF, a voltage of 10V, a temperature range of -55°C to +105°C and a useful life of 15,000 hours (dependent on application).

This capacitor is ideal for applications that require low ESR (equivalent series resistance) and high ripple current. In motor drives, it can be used to filter and smooth the low-frequency current from a high-frequency AC input. In pulse power systems, it can reduce switching losses and increase energy efficiency. In switchmode power supplies, it can reduce the peak-to-peak ripple voltage, improving the life and reliability of the circuitry. In RF transmitters, it can reduce the harmonics of the signal, improving signal quality. In audio amplifiers, it can filter and reduce noise, improving audio quality.

Working Principles of 160YXF22MEFC10X20

An aluminum electrolytic capacitor consists of two plates, a positive anode and a negative cathode, that are separated by a dielectric electrolyte. The anode plate is made of aluminum foil and the cathode plate is made of electrolytic paper impregnated with an electrolytic solution. The two plates are rolled up and sealed in a cylindrical case. The electrolyte is contained inside the case.

When a DC voltage is applied across the two plates, the positive anode plate develops an oxide layer on its surface. This thick oxide layer serves as the dielectric and is responsible for the capacitance of the capacitor. The capacitance is determined by the thickness, surface area, and dielectric constant of the oxide layer. As long as the voltage remains below the working voltage of the capacitor, the oxide layer will remain secure and the capacitor will not leak.

When a reverse voltage is applied, the charge stored in the capacitor is discharged, allowing the oxide layer to break down and eventually fail. This phenomenon is known as "reverse voltage breakdown" and it is important to ensure that the device is not subjected to any reverse voltage. If the voltage exceeds the specified rating, the device may permanently fail.

When operating the capacitor, it is important to take into account the voltage and temperature ratings of the device. Temperatures above the rated limit can cause the electrolyte to evaporate, resulting in a decrease in capacitance. Voltage ratings should also be taken into consideration to ensure that the device is not exposed to reverse voltage. If any of these parameters are exceeded, the device may lead to damage, or worse, permanent failure.

Conclusion

The 160YXF22MEFC10X20 aluminum electrolytic capacitor is designed for use in power electronics applications where high ripple current and low ESR are required. It has a capacitance of 1.800µF, a voltage of 10V, a temperature range of -55°C to +105°C and a useful life of 15,000 hours. It is important to take into account the voltage and temperature ratings of the device in order to ensure that the device does not experience reverse voltage breakdown or evaporate electrolyte.

The specific data is subject to PDF, and the above content is for reference