180VXR1800MEFC35X45

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are widely used in a variety of electronic applications due to their high energy storage capacity, small size, and relatively low cost. This type of capacitor is constructed using a thin aluminum oxide film and an electrolyte solution as its dielectric. The aluminum electrolyte acts as a barrier between the two conducting plates, while the electrolyte solution acts as an ion bridge between them. This allows for an efficient charge and discharge cycle.

180VXR1800MEFC35X45 Capacitor Type

The 180VXR1800MEFC35X45 is an aluminum electrolytic capacitor with a rated operating voltage of up to 180 volts, a maximum capacitance value of 1800 muoefarads, and an operating temperature range from -55°C to +85°C. The size of this component is 35x45mm. It is a polarized device, which means that the positive and negative terminals must be connected with the correct polarity in order for it to function properly.

180VXR1800MEFC35X45 Application Field and Working Principle

The 180VXR1800MEFC35X45 is primarily used for filtering and buffering voltage fluctuations in AC/DC circuits. It can also be used to improve signal-to-noise ratios in audio circuits. The working principle of this type of capacitor is that the electrolyte acts as a resistive medium between the two conducting plates. When a voltage is applied to the plates, the current flow is increased, which causes the electrical charge stored on the plates to be increased. When the plates have reached their maximum charge, the current flow is stopped, and the charge stored on the plates is maintained. This stored charge can then be used to filter out voltage fluctuations in the circuit.

Advantages and Disadvantages

Aluminum electrolytic capacitors have several advantages over other types of capacitors. They are generally less expensive, have larger capacitance values, and can handle higher voltage levels than other types of capacitors. However, they also have some drawbacks. They are prone to leakage, have a limited lifetime, and are not suitable for high frequency applications. Additionally, aluminum electrolytic capacitors are polarized devices, so it is important to connect them with the correct polarity in order to achieve the desired performance.

Conclusion

The 180VXR1800MEFC35X45 aluminum electrolytic capacitor is a popular choice for filtering and buffering voltage fluctuations in AC/DC circuits. Though it has some drawbacks, such as prone to leakage and limited lifetime, its advantages make it a preferable choice for many applications. The proper connection of the terminals must be observed in order for it to work properly, as it is a polarized device.