1N4572-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N4572-1 is a type of zener diode, or a zener-regulated shunt regulator. It is a single semiconductor device used for voltage regulation and current limiting and consists of a forward biased PN junction diode and a voltage reference. Zener diodes are widely used in current limiting, AGC and voltage regulation applications.

This diode is designed to operate within the temperature range of -65 to +175 degrees Celsius and with a reverse voltage of 6.2 to 16.2 V. The maximum reverse current is 0.02 mA and maximum forward current is 300 mA. It is also capable of regulating an input voltage of up to 16.2 volts and has an output regulation of around 0.2%.

When used for voltage regulation, the 1N4572-1 helps to limit fluctuations in the input voltage, allowing the output to remain relatively constant. This diode is good for this application as it can operate in a variety of different operating conditions and respond quickly when faced with sudden input voltage changes. It is also relatively efficient, as it does not draw power from the circuit when not actively regulating.

The basic operation of the 1N4572-1 can be described as follows. In normal operation, the reverse biased PN junction diode acts as a voltage reference which, when sustained above a threshold value, switches on the diode and begins to regulate the input voltage. The diode will continue to regulate the input voltage until it steps down to the reverse bias voltage, when it will turn itself off.

This principle of operation is the same across all types of zener diodes, with the only difference being the specified operating temperature range and the reverse voltage range. This makes these diodes very versatile and efficient components in many applications such as power suppliers, AC adapters and audio amplifiers.

The 1N4572-1 can also be used in current limiting applications. In this case, the diode acts as a maximum current limiter, allowing only a certain amount of current to flow into the circuit. This current limiting is done by the zener diode controlling the current by allowing lower or higher current in response to sudden changes in the input voltage. This prevents the circuit from overloading or burning out due to excessive current flow.

The 1N4572-1 is also used in automatic gain control (AGC) circuits. In this application, the diode helps to keep the signal at a given average level by adjusting the gain of the amplifier in response to signal changes. This type of application requires precise control and regulation of the signal level, as even small fluctuations can lead to audible distortion.

Overall, the 1N4572-1 is a highly versatile diode that is capable of many different operations and applications. It has widespread usage in fields such as audio systems, power supplies, AGC circuits and others, and is capable of responding quickly to sudden changes in load and voltage. This makes it an important component in many different devices.

The specific data is subject to PDF, and the above content is for reference