1N4678 TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A 1N4678 TR is a type of a single Zener diode. It is used for the supply of constant voltage and helps in the regulation of current. It is also employed for voltage regulation, voltage reference and/or reverse voltage protection. This diode is also used in pulse shaping, AC rectifying and also in switching applications.

Basically, the working of a 1N4678 TR can be understood in terms of any other single Zener diode. It works by allowing current only when the input voltage is above the device\'s breakdown voltage, which is the Zener voltage. Thus, the device provides voltage regulation. As the input voltage approaches the Zener voltage, current starts to pass through the device. On the other hand, when the input voltage is below the Zener voltage, current does not flow through the device, and consequently, there is no voltage regulation.

In terms of application, 1N4678 TR finds its use in replaceable DIN voltage regulators, in current limiting, voltage regulation, and spike protection. This device is especially useful for circuitry in which a small amount of current is to be controlled, like for the protection and level shifting of a logic gate. Other applications for this capabilities of this device include switch-mode power supplies, linear regulators, clamps, voltage regulators and voltage references.

In terms of its external components, 1N4678 TR is a small package diode with a power dissipation rating of 500mW, which is quite low compared to other models in the same category. It also has an operating temperature range of -65°C to +175°C, which is quite impressive and helps to increase its lifetime. Additionally, this device also features a high load current tolerance of 4.5mA and a breakdown voltage rating of 4.7V.

In terms of its internal construction, 1N4678 TR features a single zinc oxide layer between the anode and cathode. This zinc oxide layer helps to reduce the forward voltage drop between the anode and cathode and allows the device to operate with a Zener breakdown voltage of 4.7V. This layer also helps to prevent current from passing through the device when the voltage is below the breakdown voltage.

In conclusion, 1N4678 TR is a single Zener diode mainly used for voltage regulation, voltage reference and/or reverse voltage protection, switch-mode power supplies, linear regulators, clamps, and voltage references. This device has an impressive power dissipation rating, a high load current tolerance, and a wide operating temperature range, which makes it an especially useful device for applications in which a small amount of current is to be regulated.

The specific data is subject to PDF, and the above content is for reference