1N4903

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N4903 is a single-chip, planar, ultra-small, high-efficiency Zener diode. It has the advantages of low leakage current, low reverse current, and low forward voltage, achieving a rated power of 0.2W and a low noise ripple of approximately 4mV on the input side. In addition, it is designed with a low forward voltage of about 0.8V, allowing for a wide variety of applications.

1N4903 is widely used in various types of electronic device, such as computers, peripherals, cell phones, audio-visual equipment, portable electronic devices, power tools, etc. It can also be used for various connections such as a voltage regulator for different levels of voltage and for various other applications used in the power supply industry.

The Working principle of the 1N4903 is fairly simple. It includes two terminals where a voltage is applied and measured in order to regulate the current. The terminals are then connected to the ground directly by a resistor which then controls the current flow. The current regulation is done by changing the resistance of the resistor, changing the voltage applied, or by changing the temperature. The 1N4903 has three main operating points: active, standby, and thermal protection.

When applying a voltage to the 1N4903, the active point is reached when the voltage is greater than 4 V. At this point, the forward voltage drop is around 0.7V, and the current can still be monitored and regulated. At the standby point the voltage is between 1.8V and 3.6V, and the forward voltage drop reduces to around 0.4V. In this state the current regulation is done by the resistance of the resistor. Finally, the thermal protection point is reached when the forward voltage drop is between 0.2V and 0.3V, which indicates maximum power consumption and potential damage.

In conclusion, the 1N4903 is an ultra-small, high-efficiency Zener diode with very low leakage current, reverse current, and forward voltage. It also has a low forward voltage of approximately 0.8V and is suitable for a variety of electronic applications. It works by applying a voltage and regulating the current passing through by changing the resistor or the voltage applied. The 1N4903 has three main operating points active, standby, and thermal protection for control of current passing through the diode.

The specific data is subject to PDF, and the above content is for reference