1N5264C-TAP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N5264C-TAP, also known as a Zener Single Diode, is a type of diode that effectively limits the voltage in a circuit. A perfect diode connection allows current to flow in one direction, while blocking the current in the other direction, but when a certain voltage is met, it will "switch" and begin conducting current in both directions. The main use of a Zener single Diode is to act as a voltage regulator in low voltage, low power applications.

The 1N5264C-TAP specifically has a 5.6V breakdown voltage and is rated for 500mW minimum power dissipation. This makes it advantageous for voltage regulation in almost any low voltage application, from cell phones and computers to toys and electronics. It is most commonly used to provide over-voltage and reverse-voltage protection for digital components such as microcontrollers.

The 1N5264C-TAP works in a simple way. A voltage is applied to the anode side and current starts flowing from anode to cathode. When the voltage across the diode reaches the specified breakdown voltage, which in the case of the 1N5264C-TAP is 5.6V, the diode will “breakdown” and start conducting in both directions. This is most useful in applications that need voltage regulation because it will allow the excess voltage to be discharged until the voltage is back to a safe level. This also helps to protect the components in the system that may not be able to handle such a high voltage.

In addition to providing over-voltage and reverse-voltage protection, the 1N5264C-TAP can be used in a number of other applications. It can be used as a voltage reference in a series circuit. It can also be used in LED switch applications or as a noise suppression element. It is also used as a current limiting element or as a current switch in low voltage applications.

Another popular use of the 1N5264C-TAP is in radio frequency (RF) circuits. In RF circuits, the Zener single diode can be used to prevent the power supply from entering deep negative voltage during peak periods. This is important because it can help to prevent the circuit from being damaged. This is especially important in RF circuits since the components are typically sensitive to this type of damage.

The 1N5264C-TAP is a reliable and affordable component that is designed for low voltage and low-power applications. It is most commonly used as a voltage regulator or over-voltage protection, but it can also be used in other applications as well. Its 5.6V breakdown voltage makes it a great choice for low voltage applications and its robust design makes it a reliable component.

The specific data is subject to PDF, and the above content is for reference