1N5812

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	50V
Current - Average Rectified (Io):	20A
Voltage - Forward (Vf) (Max) @ If:	950mV @ 20A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	15ns
Current - Reverse Leakage @ Vr:	10µA @ 50V
Capacitance @ Vr, F:	300pF @ 10V, 1MHz
Mounting Type:	Stud Mount
Package / Case:	DO-203AA, DO-4, Stud
Supplier Device Package:	DO-203AA
Operating Temperature - Junction:	-65°C ~ 175°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

1N5812 is a single diode rectifier. It is a type of diode which is designed to exclusively allow the flow of current in one direction and block current from going in the opposite direction. This makes the 1N5812 a great choice for applications like power supplies, voltage regulators and circuit protection. Additionally, the 1N5812 has been optimized to provide superior performance and efficient operation within its intended application fields.

Application Fields

The 1N5812 is mainly used in applications of power supply, voltage regulators, and circuit protection.In power supply applications, the 1N5812 allows the power converter to quickly and efficiently step up or step down the voltage to the desired levels. This makes it a great choice for applications such as AC/DC power supplies, switch mode power supplies, and laptop power supplies.The 1N5812 is also a great choice for voltage regulator applications. Voltage regulators help maintain a constant output voltage by detecting the voltage levels and switching current accordingly. By using a rectifier such as the 1N5812, the output voltage can be maintained at the desired level without having to go through the entire range of input voltages. This makes it ideal for use in applications such as consumer electronics and automotive industry.Finally, the 1N5812 is also a great choice for applications in circuit protection, such as voltage clamping. A voltage clamp is a device that is used to limit the flow of current to an acceptable level. This can be done by rectifying the input voltage, filtering the signal, and then switching current. By using a diode such as the 1N5812, the input voltage can be rectified quickly and efficiently to protect the circuit from overvoltage.

Working Principle

The 1N5812 rectifier operates on the principle of a power semiconductor diode or rectifier diode. This is essentially a device which can only allow current to flow in one direction. The 1N5812 is a single-phase, full-wave rectifier, meaning that it takes an AC signal and converts it into a DC signal, allowing only current to flow in one direction.In operation, the 1N5812 consists of two terminals, an anode and a cathode. When the AC signal is applied to the two terminals, electrons flow through the diode from the negative terminal to the anode, in the process converting the AC signal into a DC one. The amount of current that is allowed to flow through the rectifier is regulated by the current ratings of the device.This fundamentally allows the 1N5812 to act as a voltage regulator, by allowing current to flow in one direction, and not allowing it to flow in the opposite direction. This has a range of benefits, such as providing superior performance and efficient operation within the intended application fields.

Conclusion

The 1N5812 is a single diode rectifier which can be used in a range of different applications. It is a device which is designed to exclusively allow the flow of current in one direction and block current from going in the opposite direction. This makes the 1N5812 an excellent choice for applications such as power supplies, voltage regulators, and circuit protection. Additionally, the 1N5812 has been optimized to provide superior performance and efficient operation within its intended application fields.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description