1N734

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1N734 is a single Zener diode, named after Dr. Claud Zener who discovered the breakdown phenomenon in diodes. It is a three-pin component with the typical dimensions of 2 mm x 1 mm. The first pin is the cathode, the second is the anode, and the third one is the shield, which can be typically used in a powered circuit as protection. Therefore, the possible application fields of 1N734 are very wide, spanning from discrete and grid-connected voltage regulators, powering circuitry that uses low voltage, and clipping of signals.

The working principle of 1N734 is based on Zeners\' phenomenon of reverse breakdown in diodes. When a reverse voltage is applied to the 1N734, current will flow through it, thus operating as a voltage regulator. Up to a certain voltage, the Zener diode will break down and result in a controlled breakdown, where the current starts to flow and then the diode behaves like a shorted diode. Therefore, it can act as a voltage regulator when the input voltage is higher than the desired regulated voltage.

1N734 is made of an N-type conduction layer, which is a reverse biased silicon diode, and a semiconductor chip. The chip has a positive temperature coefficient (PTC), which means that the resistance increases linearly with temperature, thus regulating the current flow. This feature makes 1N734 suitable for precision current limiting applications, where up to a certain higher temperature, the PTC will cause the self-limiting of the current flow.

1N734 is often used in audio circuits, such as in series with transistors, acting as a voltage regulator. It ensures that the voltage that is presented at the base of the transistor does not exceed a certain voltage value. It can also be used in power supplies as a voltage-clipping circuit, helping to maintain a constant voltage at different load conditions.

In summary, 1N734 is a single Zener diode, which can be used in various applications, from discrete and grid-connected voltage regulators, powering circuitry that uses low voltage, and clipping of signals. Its working principle is based on Zeners\' phenomenon of reverse breakdown in diodes, and the positive temperature coefficient (PTC) allows it to be used in precision current limiting applications.

The specific data is subject to PDF, and the above content is for reference