1N741

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A 1N741 is a single-body Zener diode, capable of regulating and stabilizing the voltage output of DC power supplies. It is a widely used, three-terminal, voltage-stabilizing diode designed specifically for reverse-bias circuits. It is used in applications that require stabilizing of both the input and output of a DC-powered circuit to prevent over-voltage and/or over-current damage.

A 1N741 diode is built with a notably low-leak mark and good breakdown characteristics, so it is able to regulate and stabilize voltages even in the presence of low-leak reverse circuits. When the externally generated voltage is much higher than the Zener breakdown voltage, the diode is generally reverse biased, thus protecting the circuit from a high voltage. Operating in reverse-bias mode, the 1N741 diode exhibits a very low off-state leakage current and it can easily handle high-power loads.

The 1N741’s most common applications include voltage regula-tors, voltage stabilizers, voltage division networks, current limiters, and early-clipping circuits. The 1N741 regulates and stabilizes the input and output of the DC circuit by controlling the voltage-drop across it. The voltage drop across the diode is the difference between its Zener breakdown voltage and the externally generated voltage.

The working principle of the 1N741 diode lies in the combination of an N-type and a P-type semiconductor layer. When the externally produced voltage is equal to or higher than the diode\'s Zener breakdown voltage, the normal-doped (N-type) valley region of the diode enters saturation. This makes the N-type region conductive, thus allowing current to flow from the negative terminal of the external source to the positive terminal.

At higher reverse-bias source voltages, outside the Zener breakdown voltage range, a narrow depletion region forms at the junction of the two layers. The depletion region acts as an insulator, so the current flow is then limited and the voltage is stabilized. This enables the 1N741 diode to notice and respond to sudden changes in the externally produced voltage, thus adding protection and reliability to the circuit.

The 1N741 is a simple and cost-effective component that provides a basic and easily applied voltage stabilization solution. Other benefits include low power dissipation, low leakage current, and a wide range of operating temperature. Whether it is used in DC and AC power supplies, digital logic circuits, or in other high-current, low voltage applications, the 1N741 Zener diode serves its purpose of protection, regulation and stabilization for protection of the circuit.

The specific data is subject to PDF, and the above content is for reference