1N758A-1

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 1N758A-1 is a single zener diode. It is widely used in all sorts of electronics, particularly in circuits that need to regulate voltage or act as an electronic switch. In this article, we will discuss the application field and working principle of the 1N758A-1.

Application Field

The 1N758A-1 zener diode is primarily used for its voltage regulating ability, and it is perfect for that job. It can be used in a variety of circuits that require a steady voltage for their operation. It is often used in power supplies, voltage regulators, voltage dividers, and over-voltage protection circuits. As previously mentioned, the 1N758A-1 can also act as an electronic switch. This is achieved by placing the diode in series with a load. When the voltage across the diode is high enough, it quickly switches on and allows current to flow. This can be used to turn on and off components, such as transistors and relays, without the need for a mechanical switch.

Working Principle

The 1N758A-1 zener diode is a two-terminal electronic component. It is constructed of a heavily doped p-type semiconductor material sandwiched between two n-type semiconductor materials. The p-type semiconductor has a larger concentration of Positively-charged holes than the n-type semiconductor has negatively-charged electrons. This asymmetry allows a depletion region to form in the junction between the two materials, which acts as an insulator.

Under normal operation, the zener diode acts as an open circuit, blocking current from flowing. However, when the voltage across the zener diode reaches a certain level, it quickly switches on and starts allowing current to flow. This is because when the reverse bias voltage reaches a certain level, the resulting electric field causes some of the Negativelly-charged electrons in the n-type material to cross the junction and fill the holes in the p-type material, thus creating a conductive path. This process is known as zener breakdown. The voltage at which the zener diode begins to conduct is called the zener voltage, and it is usually printed on the body of the diode.

Conclusion

The 1N758A-1 is a single zener diode that is typically used for voltage regulation and as an electronic switch. It is constructed of two semiconductors sandwiched together and has a depletion region that acts as an insulator. When the voltage across the diode reaches the zener voltage, it quickly switches on, allowing current to flow. This makes the diode a versatile and reliable component in many circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description