1N914B_S62Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electronic components that permit the flow of current in one direction only. In this way, diodes can be thought of as one-way valves for electricity. Rectifier diode is a type of diode that is widely used to convert AC (alternating current) to DC (direct current). 1N914B_S62Z rectifier diode is a semiconductor that uses a silicon crystal substrate, a silicon controlled rectifier (SCR) as its main component, and uses a Schottky barrier to forward-bias electrons across its cathode and anode terminals. This device is ideal for high speed switching applications, as the Schottky-Barrier is easier to turn-on than a PIN-diode. As a single rectifier diode, the 1N914B_S62Z is able to withstand peak inverse voltage up to 50V and handle load currents up to 500mA.

The working principle of the 1N914B_S62Z rectifier diode is fairly straightforward. It begins as a flow of electrons from the anode terminal of the diode to the cathode terminal, when a forward-bias voltage is applied to the anode of the diode. The Schottky-barrier inside the diode lowers the barrier to the flow of electrons and greatly speeds up the current flow. Conversely, when a reverse-bias voltage is applied to the diode, it blocks the flow of electrons between the anode and cathode, effectively preventing any current from passing through the diode.

The 1N914B_S62Z rectifier diode is often used in wide range of applications such as power converters, SMPS, solar and battery chargers, switched mode power supplies, etc. For example, it can be used as a switch in AC-DC power supply to enable the desired conversion of electrical energy from alternating current (AC) to direct current (DC) using the principles of rectification known as AC-DC conversions. It can also be used in switching regulator circuits, waveform shaping circuits, ripple filters, and oscillator circuits.

The 1N914B_S62Z rectifier diode is also used as a voltage doubler in many power rectification circuits, such as automotive alternator systems, filters and variable speed motor drives, as well as in AC power filter circuits. The rectification circuit consists of two diodes and an inductor, and the diode works in reverse bias mode when the switching frequency exceeds 2 kHz. The inductor stores energy, and when the switch turns off, the energy stored in the inductor charges the capacitor. This allows the voltage published at the capacitor to be twice the voltage of the rectified input.

In conclusion, the 1N914B_S62Z is a single rectifier diode that integrates a Schottky-barrier as its main component and allows the flow of electrons to be controlled in one direction. It is popularly used in applications such as AC-DC conversions, switching regulator circuits, voltage doubling, and more.

The specific data is subject to PDF, and the above content is for reference