2038-42-SM-RP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) are devices that are used to protect electrical and electronic equipment from damage caused by surges in voltage. One type of GDT is the 2038-42-SM-RP, which has been designed for use in applications such as telecom, automotive, industrial, and military systems. This arrester is composed of a metal-oxide varistor (MOV), a surge current limiting resistor, and a voltage-dependent resistor. The 2038-42-SM-RP is intended to protect against overvoltages and transients caused by lightning, circuit switching, and inductive loads.

The working principle of the 2038-42-SM-RP GDT is to operate by using a combination of MOV, clamping resistor, and voltage dependent resistor. The MOV acts as a low-impedance path to ground for transients and overvoltage conditions. The resistor then limits the high current caused by the transients and the capacitor and the voltage-dependent resistor will regulate the remaining voltage. When the arrester receives an overvoltage or transient greater than its peak avalanche voltage, the MOV will enter an avalanche breakdown, allowing the current to pass from the power source to ground. This diverts the surge current away from the protected components, providing the required safety.

In many applications, the 2038-42-SM-RP GDT provides robust protection. It is well suited to withstand repetitive lightning-induced transients as well as to handle very fast rise times, such as those occurring in wire-to-air arcs in high voltage distribution systems. In addition, its low capacitance makes it compatible with high-speed signal integrity applications. Moreover, the surge current limiting design of the GDT ensures that the MOV will experience sustained overload current only in the event of a catastrophic event, such as a direct lightning strike.

The 2038-42-SM-RP GDT has a wide range of potential applications where protection from transient surges is required. It is suitable for use in telecom equipment, in industrial environments where high-power motor starts and inductive loads are likely, and in military applications where lightning strikes could be frequent. It is also ideal for use in high voltage distribution systems, where it can help to protect against wire-to-air arcs. In addition, it is suitable for automotive applications, where it can protect against both lightning and other transients.

In summary, the 2038-42-SM-RP GDT is a reliable and versatile device for protecting electrical and electronic equipment from transient surges and other voltage overvoltage/transient events. Its combination of MOV, surge current-limiting resistor, and voltage-dependent resistor make it suitable for use in a wide range of applications. The GDT\'s low capacitance also makes it suitable for high-speed signal integrity applications. Additionally, its low capacitance also ensures that the MOV will experience sustained overload current only in the case of a catastrophic event. Therefore, the 2038-42-SM-RP GDT is a reliable and versatile device for protecting electrical and electronic equipment from transient surges and other voltage overvoltage/transient events.

The specific data is subject to PDF, and the above content is for reference