2046-60-ALF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) is a type of electrical equipment that has become increasingly popular due to its cost-effectiveness and ability to protect circuits and equipment from high voltage events such as lightning. The 2046-60 ALF type of GDT is a gas-filled tube between two electrodes and is used to protect electrical circuits by providing a path to ground when a surge voltage is applied.

The 2046-60 ALF comes in several styles, including single-pole, dual-pole, and four-pole versions. It can be easily mounted on a surface or panel and then mounted into a connector or enclosure. The 2046-60 ALF is often used as a part of a larger system to provide additional protection from power surges and power outages. It may also be used in a variety of applications where its characteristics are well suited to handle various levels of protection.

The primary purpose of the 2046-60 ALF is to protect electrical circuits by preventing the excess current caused by lightning, power line disturbances, or other surges from damaging them. The gas in the tube acts as a short-circuit whenever the voltage rises above the breakdown voltage. The gas ionized and the tube aides in diverting the energy to ground. This reduces the voltage, allowing the protected equipment to operate normally again.

The 2046-60 ALF is designed to mount on a flat surface or inside an enclosure. It is recommended that the GDT should be placed as far from the equipment as possible to ensure it is not subjected to the same surge as the protected equipment. Additionally, the GDT should be placed close to an appropriately installed grounding system to ensure a proper ground path is provided.

The 2046-60 ALF has a unique design that uses an internal gas fill, which helps maintain the protection level. The gas fill also helps to reduce noise caused by the arrester and improves the failure mode of the arrester. The 2046-60 ALF can be used in a variety of applications, including telecommunications, automotive, UPS systems, and medical equipment.

The 2046-60 ALF is designed with a high current capacity and low impedance allowing it to facilitate faster response times when activated. This reduces the time that electrical equipment is exposed to the surge voltage, thus reducing the risk of damage. The 2046-60 ALF can be easily configured to work in a variety of applications and its versatile design allows it to be used both as a point-of-use device and in larger systems.

The 2046-60 ALF GDT is a reliable and cost-effective device that provides a path to ground for the excess current to travel, preventing damage to electrical apparatus and equipment. It can be easily configured to work in a variety of applications and its construction ensures maximum protection and long life.

The specific data is subject to PDF, and the above content is for reference