24C01CT/SN

Write Cycle Time - Word, Page:	1.5ms
Base Part Number:	24C01C
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C (TA)
Voltage - Supply:	4.5 V ~ 5.5 V
Memory Interface:	I²C
Access Time:	3500ns
Series:	--
Clock Frequency:	400kHz
Memory Size:	1Kb (128 x 8)
Technology:	EEPROM
Memory Format:	EEPROM
Memory Type:	Non-Volatile
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

The 24C01CT/SN is a memory chip that belongs to the I2C family, often referred to as an EEPROM (Electrically Erasable Programmable Read-Only Memory). It is a non-volatile memory chip that uses an advanced CMOS technology. This chip was designed for high-density serialized bi-directional data exchange between the CPU and peripheral devices. It can store up to 256-bytes of data and is ideal for embedded applications.

Application Field:

This memory chip is used in various embedded applications such as systems that need temperature or humidity monitoring, industrial data controllers, or navigation systems. It is also used in automotive and security control systems. The 24C01CT/SN is also used in medical systems such as medical baths, ultrasound scanners, X-ray systems and laboratory instruments. The chip is also used in industrial and consumer appliances such as washing machines, air conditioners, DVD players, and home automation systems.

Working Principle:

The working principle of this memory chip is very simple. It is based on the I2C protocol, which allows multiple devices to share the same two-wire bus. This protocol is used to control the data transfer between the controller and peripheral devices like the 24C01CT/SN memory chip. The chip contains an internal register which is used to control different functions like write and read operations.The 24C01CT/SN can operate at different speed levels. The highest speed for this device is 20KHz. The data is transferred in blocks of 8-bits and each block contains 7-bits of data plus a one-bit parity check. A start and a stop condition signals the direction of data flow. The data is typically sent in two 8-bit words and the first word contains the address of the memory location to be written. The next byte contains the data to be written. The 24C01CT/SN has an instruction word which contains the same information as the data byte plus a few additional insights such as internal data protection commands. The 25th and 26th bits of the instruction word are used for writing the parity bit. This memory chip also supports write-protected commands, so that data written or erased once cannot be accidentally overwritten or erased.

Conclusion:

The 24C01CT/SN is a useful memory chip designed for embedded applications such as industrial and automotive systems as well as consumer appliances. The chip uses the I2C protocol that allows multiple devices to share the same two-wire bus for exchanging data. This chip can store up to 256 bytes of data and can handle up to 20KHz transfer speed. It also supports write-protected commands to keep data from getting accidentally overwritten or erased.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description