24C02C-E/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 24C02C-E/MS is a 512-byte Serial EEPROM fabricated with a silicon gate CMOS process. With its advanced CMOS technology offering fast write cycle times, and a low current consumption, the 24C02C-E/MS is suitable for a wide range of memory applications.

Application Field

The 24C02C-E/MS provides a non-volatile storage solution for embedded systems, instrumentation, medical and industrial controls, communication systems and other memory applications requiring small size and minimal power. The device supports two-wire and three-wire serial interfaces, as well as an I2C interface, making it compatible with various embedded processors and microcontrollers.

The 24C02C-E/MS can be used in systems with a variety of processor architectures, including Motorola, Hitachi, and ARM. It can be used to store data such as configuration settings, calibration values and small text strings. It can also be used to store firmware upgrades and moderate-sized caches of data.

Working Principle

The 24C02C-E/MS uses an I2C (Inter-Integrated Circuit) bus protocol. This protocol is simple yet flexible. The I2C bus protocol is a two wire serial communication protocol for connecting multiple devices on the same bus. It is capable of addressing up to 127 devices on the same line.

The I2C protocol works in an event-driven manner: data can be sent by either a master device or a slave device. The master device initiates the communication and the slave responds to the requests. The master device will send a command to a slave device and the slave device will respond with the requested data. The master must provide the correct address of the slave device in order to successfully read and write data.

To store data on the 24C02C-E/MS, it must first be programmed using the I2C protocol. First, the master device sends a start condition followed by the slave address. Next, the master sends the data address, data and a stop condition. Finally, the slave device will respond with an acknowledgement. The data can then be read using the same I2C protocol.

Conclusion

The 24C02C-E/MS is a versatile Serial EEPROM for a wide range of memory applications. It provides a non-volatile storage solution for embedded systems and other memory applications requiring small size and minimal power. The device supports two-wire and three-wire serial interfaces, as well as an I2C interface, making it compatible with various embedded processors and microcontrollers. Data is programmed and read from the 24C02C-E/MS using the I2C protocol.

The specific data is subject to PDF, and the above content is for reference