25RX30220MT78X11.5

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.532" (13.50mm)
Size / Dimension:	0.315" Dia (8.00mm)
Lead Spacing:	0.138" (3.50mm)
Impedance:	220 mOhms
Ripple Current @ High Frequency:	360mA @ 100kHz
Ripple Current @ Low Frequency:	252mA @ 120Hz
Applications:	Automotive
Ratings:	AEC-Q200
Series:	RX30
Operating Temperature:	-40°C ~ 130°C
Lifetime @ Temp.:	2000 Hrs @ 130°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	25V
Tolerance:	±20%
Capacitance:	220µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are passive electronic components which contain two metal foil electrodes with a dielectric barrier layer of pure aluminum oxide between them. They are used in electronic circuits to store and to allow the controlled release of electrical energy. The 25RX30220MT78X11.5 is a type of aluminum electrolytic capacitor with specific characteristics that make it suitable for certain applications over other types of capacitors.The most obvious characteristic of the 25RX30220MT78X11.5 is its small size. At 78 x 11.5mm, it is one of the smallest aluminum electrolytic capacitors available. This makes it ideal for use in tight spaces in both commercial and industrial settings. The small size also makes it easier to install, solder, and replace than larger capacitors, which can require large amounts of space.In addition to its small size, the 25RX30220MT78X11.5 has a relatively high rated voltage of 30V. This is a higher voltage than most other aluminum electrolytic capacitors, helping to ensure higher performance and stability in the most demanding applications. The higher rated voltage also helps the capacitor to withstand higher temperatures, making it ideal for power supplies and other high power applications.The 25RX30220MT78X11.5 also has a low leakage current. This means that it will not cause excessive current leakage when in use. As a result, it is suitable for low power applications, where a low-leakage capacitor is particularly important. In addition, its low temperature coefficient (TC) helps to ensure consistent performance over a wide range of temperatures.The 25RX30220MT78X11.5 is well suited for use in a variety of applications. Its small size and high rated voltage make it ideal for power supplies, electric motors, AC servos, and other high power applications. Its low leakage current and temperature coefficient also make it suitable for a variety of low power applications, such as timer circuits, voltage dividers, and oscillators.The working principle of the 25RX30220MT78X11.5 is the same as any other aluminum electrolytic capacitor. When a voltage is applied to the capacitor’s terminals, a current will flow between the electrodes through the barrier layer of aluminum oxide. Once the electric charge has been stored in the capacitor, it can be released to the load or discharged. This cycle can be repeated over and over again as long as the rated maximum voltage of the capacitor is not exceeded.In summary, the 25RX30220MT78X11.5 is a type of aluminum electrolytic capacitor which is specifically designed for high power and low power applications. Its small size and high rated voltage make it ideal for using in tight spaces, while its low leakage current and temperature coefficient make it suitable for a variety of low power applications as well. Its working principle is the same as any other aluminum electrolytic capacitor, allowing it to store and release electrical energy as needed.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description