25YXF47MEFCTA5X11

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are passive electronic components that store electrical energy and release it when needed. They can be found in all sorts of consumer electronic products, industrial equipment, instrumentation and communications systems, as well as in medical, aviation and automotive applications. The 25YXF47MEFCTA5X11 is a type of aluminum electrolytic capacitors. It is typically used in higher power applications where high capacitance and long life are required. This capacitor has a rated capacitance of 47 µF and a maximum operating frequency of 1 MHz.

The 25YXF47MEFCTA5X11 capacitor consists of two metal electrodes, typically aluminum, placed in close proximity to each other, separated by an electrolytic material. The aluminum surfaces are covered with an insulating material, such as a thin layer of oxide, which is referred to as the dielectric. In most cases, the dielectric is a thin aluminum oxide film formed on the surface of the aluminum electrodes. The electrolyte material, which is most often a potassium hydroxide or other similar chemical compound, acts as a conductor, allowing current to flow from one electrode to the other.

The 25YXF47MEFCTA5X11 capacitor is a polarized device, meaning it only works when connected the correct way. The anode is the positive terminal while the cathode is the negative terminal. Failure to connect it correctly can lead to inside the capacitor short-circuiting, resulting in catastrophic failure.

The 25YXF47MEFCTA5X11 capacitor has an extremely low ESR (Equivalent Series Resistance) compared to ceramic, plastic film and tantalum capacitors. Its ESR is typically about 0.2 ohms, making it ideal for high current applications. It can also handle high ripple currents which is another advantage for demanding applications such as power supplies or signal processing. Its small size also helps, since it takes up less space on printed circuit boards.

The 25YXF47MEFCTA5X11 capacitor is best suited for applications that require high capacitance, high current handling capacity, and stability over a wide temperature range. It can be used in a variety of different applications, such as filtering and signal processing, RF circuit stabilization, and audio tuning. It can also be used in medical, aviation and automotive applications requiring high capacitance and long life.

The specific data is subject to PDF, and the above content is for reference