338CKE6R3M

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.846" (21.50mm)
Size / Dimension:	0.394" Dia (10.00mm)
Lead Spacing:	0.197" (5.00mm)
Ripple Current @ High Frequency:	1.442A @ 100kHz
Ripple Current @ Low Frequency:	1.03A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	CKE
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	2000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	140.7 mOhm @ 120Hz
Voltage - Rated:	6.3V
Tolerance:	±20%
Capacitance:	3300µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors: 338CKE6R3M Application Field and Working PrincipleAluminum electrolytic capacitors are one of the most common type of capacitors used today, and are recognized for their high power rating and versatile application potential. The 338CKE6R3M is one of the highest-rated aluminum electrolytic capacitors, and it can be used in a wide range of applications. In this article, we will discuss the types of applications the 338CKE6R3M capacitor is suitable for, as well as the principles behind its operation.The 338CKE6R3M aluminum electrolytic capacitor is an especially high-powered capacitor, with a voltage rating of 500 volts. This makes it particularly suitable for applications that require high voltage and high current, such as power amplifiers. It is also highly rated for small signal circuits, with a peak-to-peak ripple current of 800mA. The 338CKE6R3M can also be used in automotive and robotic applications, as it can handle up to 25V DC.In terms of its working principle, the 338CKE6R3M is based on the standard aluminum electrolytic capacitor design, which relies on the generation of electrical charge through the action of electrolytes and electrodes. The two plates (electrodes) of an aluminum electrolytic capacitor are typically made from aluminum foil, which is anodically etched or punched into the desired shape. These plates are then coated in a layer of electrolyte, which serves as a layer of insulation between the plates. When a voltage is applied, a current is generated from the anode to the cathode, and is stored in the dielectric layer of the electrolytic capacitor until the capacitor is connected to the load. The electrical charge stored in the capacitor increases in proportion with the applied voltage. The maximum amount of charge that can be stored depends on its design parameters and is usually indicated as capacitance, measured in Farads. As the charge increases, the current passing through the capacitor becomes limited and eventually reaches a stagnation point.In conclusion, the 338CKE6R3M aluminum electrolytic capacitor is a high-powered capacitor that is suitable for a wide range of applications, and operates on the classic principles of electrolytic capacitance. Its high voltage and current rating, along with its low dynamic impedance and low ESR, make it an ideal choice for high voltage and high current applications such as power amplifiers and automotive or robotic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description