350CFX22MEFC12.5X20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are polarized capacitors which generally contain two electrical poles separated by a dielectric material, an electrolyte and an aluminum oxide film. The electrolyte is basically a bridge to allow the electric charge to pass to the components while the oxide film forms the actual capacitance. They are the most commonly used capacitor as they provide large capacitance in a relatively small size.

The 350CFX22MEFC12.5X20 is an aluminum electrolytic capacitor with a low ESR rating. It is commonly used in applications where large capacitance and lower ESR are required such as in power supplies, switching power supplies, automotive electronics, and battery charging systems.

The working principle of the 350CFX22MEFC12.5X20 aluminum electrolytic capacitor is based on the Farads law. This law states that the capacitance of a circuit is determined by the ratio of the charge stored on the capacitor plates to the voltage applied across the capacitors. The value of capacitance is proportional to both the plate surface area and the distance between them. When a voltage is applied across the Capacitor, electrons move through the electrolyte and build up on the surface of the aluminum oxide film surrounding the plates. This dielectric layer acts as a barrier, allowing for charge storage and charge transfer.

The major advantage of using the 350CFX22MEFC12.5X20 aluminum electrolytic capacitor is its low ESR which makes it suitable for applications that demand low RMS ripple. In addition, the capacitor also has low leakage current, and is resistant to vibration and shock. Its long life also makes it an ideal choice in applications that need more reliable performance.

The 350CFX22MEFC12.5X20 aluminum electrolytic capacitor also has several disadvantages. It is sensitive to temperature which may lead to reduced component life. Its leakage current increases rapidly at high temperatures, leading to higher ESR, and possibly a short circuit. Additionally, if the capacitor is overvolted, it can lead to catastrophic failure and the capacitor must be replaced. Finally, these capacitors need to be pre-treated before being used and they are costly compared to most other types of capacitors.

In conclusion, the 350CFX22MEFC12.5X20 aluminum electrolytic capacitor is an ideal choice for applications that require low ESR and higher capacitance. Despite its disadvantages, these capacitors can provide reliable performance and long service life when used properly.

The specific data is subject to PDF, and the above content is for reference