350VXR180MEFC30X30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are one of the most reliable electrical components available. They have a range of advantages, including high capacitance, low leakage current, and stability over time. The 350VXR180MEFC30X30 is an aluminum electrolytic capacitor widely used in commercial and industrial applications.

The 350VXR180MEFC30X30 is a polarized capacitor. This means that it has a positive and negative lead for attaching to the circuit in the correct orientation. Inside the capacitor is a very thin aluminum oxide film which acts as the dielectric material and stores the electrical charge. This film is only a few nanometers thick and when exposed to a voltage potential can store electrical energy.

The 350VXR180MEFC30X30 provides a capacitance of 180 µF and a voltage rating of 350V. This is a large capacitance for a relatively low voltage, making it well suited for high frequency applications. The capacitor is also available in other capacitance and voltage values, including 10V and 20V capacitances up to 1000uF. It has ESR=45mOhm as well, making it well suited to circuits operating at high frequencies, since lower ESR value indicates less frequency dependence.

Applications for the 350VXR180MEFC30X30 aluminum electrolytic capacitor include DC-linking, AC-linking, power supplying, and smoothing circuits. In DC-linking the capacitor is used to couple or decouple two DC power sources. In AC-linking it can be used to inject a certain magnitude of alternating AC current into the circuit for the purpose of creating harmonics.

The power supplying and smoothing application requires the capacitor to act as the main energy storage and filter. The capacitor is used to store electrical energy and release it as needed. This provides a steady voltage and current to the circuit and reduces the ripple on the signal. The 350VXR180MEFC30X30 can reach a maximum operating frequency of 20MHz making it suitable for use in audio applications.

The working principle of the 350VXR180MEFC30X30 aluminum electrolytic capacitor is fairly simple. When voltage is applied across the terminals, current will flow between the anode and the cathode. This current flow generates an electric field, which is responsible for charging the aluminum oxide dielectric layer. This layer begins to accumulate electrons on the surface of the cathode, which results in the creation of electric potential energy between them.

The electric potential is then maintained, because of the presence of ionic charges in the electrolyte. If the potential of the capacitor is greater than that of the circuit, then electrons will be released from the oxide layer, creating a current. This current then flows into the circuit and is used for various purposes, depending on the application. The voltage and current can be precisely regulated, making the capacitor very reliable and useful in many applications.

In conclusion, the 350VXR180MEFC30X30 aluminum electrolytic capacitor is a versatile and reliable component which can be used for a variety of applications. It has a large capacitance and a low ESR rating, making it suitable for high frequency operation. It also has a voltage rating of up to 350V, which is suitable for DC-linking, AC-linking, power supplying, and smoothing circuits. The working principle of the capacitor is relatively straightforward, and it is an invaluable component for many applications.

The specific data is subject to PDF, and the above content is for reference