400HFG1200MBN45X60

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are among the most widely used types of capacitor, and the 400HFG1200MBN45X60 is no exception. It is a device that stores and releases energy in order to create a voltage or current between two points. As a result, the 400HFG1200MBN45X60 can be used for a range of applications in electronics, from helping to reduce power supply noise to providing high tolerance charge and discharge capabilities for power items such as ultrasonic cleaning tanks.

The actual design and construction of the 400HFG1200MBN45X60 depends upon the application it is intended for. Generally, aluminum electrolytic capacitors consist of an aluminum case, with a liquid electrolyte poured inside, which is separated from the positive terminal by a paper dielectric. The negative terminal is the aluminum case itself, while the positive terminal is an external plate between the case and the electrolyte, usually made of metal. This arrangement creates a capacitance between the two terminals, measured in Farads, with the capacitance value typically being higher the larger the plate area is relative to the gap between it and the case.

The 400HFG1200MBN45X60 is designed with an extended lifetime in mind, as any drop in its capacitance over time could create circuit failures. To address this problem, companies use a variety of technologies, which involve preventing the oxidation of the aluminum case, or creating a thicker oxide coating in order to extend the life of the capacitor. On the other hand, some models might use a thin film of aluminum to reduce the leakage current, as well as the equivalent series resistance and the dissipation factor. Other types of capacitors might also be included in its construction, such as a non-polarized design to prevent excessive dielectric losses.

The primary application areas of the 400HFG1200MBN45X60 depend heavily upon its design and construction. For example, it can be used as part of power supply systems, where its high sensitivity and tolerance for high frequencies make it an ideal choice. Similarly, it can also provide stable current readings in rectifier circuits, operating in environments such as computer networks and portable medical equipment. Additionally, it can also be used in filter circuits to reduce power supply noise and in charge pumps to to increase the voltage available to drive circuits. Finally, it finds uses in appliances such as the power adapter of an ultrasonic cleaning tank.

The working principle of the 400HFG1200MBN45X60 is the same as any other type of capacitor. When a voltage is applied, the current is diverted through the electrolyte, stored in the area between the two plates, and then discharged when the voltage is removed. As a result, the 400HFG1200MBN45X60 is not only able to store electrical energy, but also to generate current and voltage. This makes it an incredibly versatile device, suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference