400USG220MEFCSN25X30

Series:	USG
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	220µF
Tolerance:	±20%
Voltage - Rated:	400V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	3000 Hrs @ 85°C
Operating Temperature:	-25°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	1.58A @ 120Hz
Ripple Current @ High Frequency:	2.212A @ 10kHz
Lead Spacing:	0.394" (10.00mm)
Size / Dimension:	0.984" Dia (25.00mm)
Height - Seated (Max):	1.260" (32.00mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can - Snap-In

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors are an important type of capacitor that can be found in numerous electronic devices. They are made from aluminum foil and usually feature an electrolytic dielectric material, often a liquid electrolyte. The aluminum electrolytic capacitor is an electronic component which can be used to store and discharge electricity. The device consists of two aluminum foils, one of which is connected to the cathode and is covered with an electrolytic material. The other one is connected to the anode and remains exposed to the atmosphere.A 400USG220MEFCSN25X30 aluminum electrolytic capacitor is a polymer film capacitor with a special plastic dielectric, such as polypropylene, for solid electrolytic capacitor. It has a rated voltage of 400V and capacitance of 220uF. The SN25X30 refers to the package size, which stands for 25mm (length or width) by 30mm (height).The application field and working principle of 400USG220MEFCSN25X30 aluminum electrolytic capacitor can be used in a wide variety of electronic circuits. The main application is in filter circuits, like high-pass filter, low-pass filter, band-pass filter and combinations of the same. It is also used to regulate higher voltage levels in devices whichFeature protection from voltage fluctuations.When a 400USG220MEFCSN25X30 aluminum electrolytic capacitor is connected to a DC circuit, the electrolytic material separating the two aluminum foils acts as an insulating dielectric which can store electrical charge. When there is no voltage applied to the circuit, no current can flow and the capacitor is \'open\'. As the voltage increases, electric current begins to flow through the material, charging the capacitor. With the increase of voltage, more current starts to flow and the capacitance of the capacitor also increases, allowing for higher capacitance.When the voltage across the capacitor has reached its maximum level, no more current can flow through it and the capacitor has achieved its \'closed\' state. The capacitance of the capacitor will not be further increased and will remain constant until the voltage across the circuit is reduced. When the voltage across the capacitor is decreased, the same amount of current cannot flow through it anymore and the capacitor gradually discharges itself, releasing the stored energy.In conclusion, 400USG220MEFCSN25X30 aluminum electrolytic capacitors are a type of capacitor mainly used in filter circuits, and their working principle is based on the electric field created between two aluminum foils separated by an electrolytic material. They are capable of storing and releasing electrical energy, depending on the voltage applied.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description