400USG680MEFC35X40

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.654" (42.00mm)
Size / Dimension:	1.378" Dia (35.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ High Frequency:	4.144A @ 10kHz
Ripple Current @ Low Frequency:	2.96A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	USG
Operating Temperature:	-25°C ~ 85°C
Lifetime @ Temp.:	3000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	400V
Tolerance:	±20%
Capacitance:	680µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitor Introduction

Aluminum electrolytic capacitors are an important component in modern electronic equipment. They are used to store and discharge electric charge, providing temporary power when connected in a circuit. The 400USG680MEFC35X40 capacitor is an example of an aluminum electrolytic capacitor and is used in a variety of industrial, telecommunications, and consumer applications.

Application Fields of 400USG680MEFC35X40 Capacitor

The 400USG680MEFC35X40 capacitor is a popular choice for industrial, telecommunications, and consumer products due to its high-performance and reliability. In industrial applications, they are used to provide smooth current to motors, protect circuitry from damage, and protect from electrical noise. They are also used in a variety of telecommunications devices including switches, modems, and antennas. In consumer electronic equipment, they are used for signal amplification and filtering, energy storage, and voltage regulation in TV, DVD, and radio circuits.

Working Principle of 400USG680MEFC35X40 Capacitor

The 400USG680MEFC35X40 capacitor is a polarized capacitor that stores energy in the form of electric charge. It works by storing charge on two plates, one positive and one negative, separated by an electrolyte. When a voltage is applied to the positive and negative plates, charge begins to flow from one plate to the other. At the same time, current also flows in a circuit. The amount of charge stored, capacitance, is determined by the size and material of the two electrodes, as well as the type and concentration of electrolyte. When the voltage between the plates reaches a maximum, the charge stored reaches its maximum capacity (capacitance). Finally, when current stops flowing in the circuit, capacitance decreases and the stored energy is released back into the circuit.

Conclusion

The 400USG680MEFC35X40 capacitor is an example of an aluminum electrolytic capacitor that is used in a variety of industrial, telecommunications, and consumer electronics. It works by storing charge on two plates that are separated by an electrolyte. When a voltage is applied, charge begins to flow from one plate to the other, allowing current to flow in the circuit. Depending on the size and material of the two electrodes, as well as the type and concentration of electrolyte, a certain amount of charge (capacitance) will be stored. When the voltage between the plates reaches a maximum, the capacitance is at its maximum. Finally, when current stops flowing, the stored energy is released back into the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description