420MXG180MEFC30X25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are further categorized into two main varieties, based on how their capacitance is derived. The first type is a wound capacitor, which uses two thin layers of aluminum foil separated by paper insulation, with the ends of each foil wound around a spindle or tube. The second type is constructed of multiple layers of aluminum foil with a dielectric oxide film coated on each layer and a layer of paper insulation between them. Despite their different construction methods and resultant capacitance value, both types are commonly referred to as electrolytic capacitors.

The 420MXG180MEFC30X25 aluminum electrolytic capacitor is a high-voltage, high-temperature, non-electrolytic capacitor with a tolerance of 180%/45% of rated capacitance at 120oC. It is a good choice for applications that require very stable capacitance over a wide temperature range, as well as over a long period of time. With its high rate of heat dissipation, it can be used in applications where temperature stability is critical.

The 420MXG180MEFC30X25 aluminum electrolytic capacitor operates on the principle of capacitive reactance. A capacitor stores electrical charge when electrical current passes through it, creating potential difference between its two electrodes. The potential is then dissipated as current over time. When a voltage is applied to an aluminum electrolytic capacitor, capacitor plates are polarized and the capacitor’s capacitance increases. The voltage is then dispersed across the plates, and excess charge is removed by an absorbent material. This creates a dielectric layer on the plates, which allows the capacitor to store energy.

This aluminum electrolytic capacitor is typically used in high-voltage electrical circuits, such as those found in motors, generators, switchgear, and other power equipment. It is also used to maintain the voltage of the power source and in applications that require a steady, long-term power source. Its capacitance rating is ideal for applications that need a high-voltage burst, such as flashlights and strobe lights, in emergency lighting systems, and in automobiles. Its quick charge and discharge rate make it suitable for stabilizing high-frequency currents.

The 420MXG180MEFC30X25 aluminum electrolytic capacitor is a solid-state capacitor, meaning that it is constructed of solid-state electronics, making it more reliable than standard electrolytic capacitors. It is also resistant to harsh environments and has an increased life expectancy due to its higher temperature tolerance. Finally, its low ESR (Equivalent Series Resistance) makes it a good choice for applications that require high-frequency stability.

The 420MXG180MEFC30X25 aluminum electrolytic capacitor is a solid-state capacitor that is most suitable for high-voltage applications due to its high voltage rating and low ESR. The aluminum foil based capacitor is constructed using two plates of foil, separated by an absorbent material. When a voltage is applied, the two plates become polarized and create electrostatic charges, creating the desired capacitive reactance value. It is resistant to harsh environments, has an extended life expectancy, and is stable over a wide temperature range, making it an ideal choice for applications that require power stability over long periods of time.

The specific data is subject to PDF, and the above content is for reference