420MXH330MEFC35X30

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.260" (32.00mm)
Size / Dimension:	1.378" Dia (35.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ High Frequency:	2.184A @ 10kHz
Ripple Current @ Low Frequency:	1.56A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	MXH
Operating Temperature:	-25°C ~ 105°C
Lifetime @ Temp.:	2000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	420V
Tolerance:	±20%
Capacitance:	330µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors, among the many types of capacitor available in the electronics components market, are some of the most widely used. This type of capacitor uses a dielectric material that is an aluminum foil electrode covered with a thin metal oxide film. The separated aluminum oxide electrolyte space is filled with an electrolyte solution that contains ions and acts as the dielectric.In relation to the specific type of Aluminum Electrolytic Capacitor noted in the title of this article, a 420MXH330MEFC35X30, it is characterized as a miniature high-capacity, very low-ESR, low-impedance capacitor. It is typically used in applications that require a large capacitance with a small physical size, such as personal computers, audio amplifiers and similar electronics.The working principle and application field of this particular type of Aluminum Electrolytic Capacitor can be best explained by looking at its two main components: the cathode and the anode. The cathode of this particular capacitor is made up of an aluminum foil-type material and is connected to the positive terminal of the device. The anode is a metal oxide film that’s covered on top of the aluminum foil and is connected to the negative terminal of the device.The electrolyte that is used in this type of capacitor is an acidic or alkaline solution which is held between the cathode and anode in order to provide electrical insulation. The electrolyte is ionized to allow for current to flow between the two electrodes. The aluminum oxide film that covers the aluminum foil acts as a dielectric layer that allows electrical charge to be stored. The capacitor is charged when a voltage is applied across its terminals.In terms of its application field, the 420MXH330MEFC35X30 Aluminum Electrolytic Capacitor is used primarily for power supply filtration applications, motor control applications, LED lighting applications, etc. Its defining features make it suitable for use in many other applications as well.For example, in order computing and audio equipment, the capacitor is used as an electrolytic filter that can reduce transient voltages, reduce audible noise in audio equipment, and reduce or eliminate crosstalk in computers and other electronic devices. In automotive electronics, this type of capacitor may be used to filter power to reduce spark plug fouling, as well as reduce engine vibration. In LED lighting applications, the capacitor can be used to minimize flicker and reduce current spikes.All in all, the 420MXH330MEFC35X30 Aluminum Electrolytic Capacitor is a great tool for many different types of applications due to its low size, high capacity, and low ESR. It is used in a variety of electronic components and applications to provide efficient filtration and higher reliability. With its various features and uses, it is a great addition to any electronics enthusiast’s toolkit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description