450HXG100MEFCSN25X25

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.063" (27.00mm)
Size / Dimension:	0.984" Dia (25.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ High Frequency:	1.68A @ 10kHz
Ripple Current @ Low Frequency:	1.2A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	HXG
Operating Temperature:	-25°C ~ 105°C
Lifetime @ Temp.:	3000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	450V
Tolerance:	±20%
Capacitance:	100µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are energy storage devices consisting of two aluminum foils, one of them being coated with a dielectric layer and the other with an electrolyte material. They are widely used for general purpose applications where stable capacitance and voltage need to be maintained. A common application for electrolytic capacitors is power supplies. Capacitors are used to store energy and are typically used in combination with a rectifier diode to provide a regulated voltage to power electronics. The 450HXG100MEFCSN25X25 is an aluminum electrolytic capacitor, which can be used for a range of applications in motor drives, switch mode power supplies, and inverter drives. This capacitor has a maximum ripple current rating of 1A and an operating temperature of -40°C to +105°C. It also has good frequency response and high stability, making it suitable for applications with high current or frequency requirements such as motor drives and switch mode power supplies.The working principle of aluminum electrolytic capacitors is based on their structure. Two aluminum foils are placed parallel to each other, with a dielectric material (usually a non-conducting metal oxide) between them. One of the foils is then coated with an electrolyte which acts as an ion source, providing the necessary ions for current flow. When a voltage is applied across the two foils, ions flow from the electrolyte to the metal foil, leading to the formation of an electric double layer. This electric double layer is responsible for the capacitor’s capacitance, which is the amount of electrical energy that can be stored. When a voltage is applied to the capacitor, a charge begins to build up in the capacitor’s plates, resulting in a potential difference between the two plates. This potential difference produces an electric field, which opposes the applied voltage and thus causes a current to flow in the circuit. As the current is increased, so is the voltage across the capacitor and so is the charge stored on it. As the capacitor reaches its rated voltage, the capacitor’s capacitance begins to decrease. This decrease in capacitance is caused by the increased electric field strength, which compresses the electric double layer until it eventually collapses and the capacitor’s capacitance reaches zero. This is known as dielectric saturation and is usually the limiting factor when using aluminum electrolytic capacitors. Aluminum electrolytic capacitors are one of the most common types of capacitors used in a variety of applications. They are highly reliable and durable, providing consistent performance and stability over a wide range of temperatures and frequencies. The 450HXG100MEFCSN25X25 is a version of this type of capacitor, which has a maximum ripple current rating of 1A and is suitable for use in motor drives, switch mode power supplies, and inverter drives.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description