450LSU6800M77X170

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors (AECs) are a type of non-polarized capacitor which is generally used in electronics applications. They consist of an anode made of aluminum foil, with a layer of an electrolyte deposited onto it, and an electrolytic paper which acts as a dielectric. The aluminum foil acts as the capacitor’s cathode. AECs are generally low cost, have low non-polarization effects and are easy to manufacture in large quantities.

The 450LSU6800M77X170 aluminum electrolytic capacitor is a unit designed specifically for use in applications involving low-voltage high-isolation needs. The capacitor is a surface-mount device (SMD) which measures 7.7 mm L × 8.0 mm W and is a non-polarized unit with a voltage rating of 6.3V. Its capacitance value is 0.68 uF and its leakage current is rated at 0.007 mA at 25 degrees. This capacitor has a low ESR rating of 3.3mΩ that gives it a low cost value.

The 450LSU6800M77X170 capacitor has a variety of applications across the engineering field. Its small form factor makes it suitable for use in many devices such as digital signal processors, motor controllers and power supplies. Other applications include frequency division, filtering out unwanted signals, signal integration and a variety of other electrical and electronic applications.

The operation principle of the 450LSU6800M77X170 aluminum electrolytic capacitor is quite simple. The capacitor consists of two metal plates, an anode and a cathode, which are separated by a dielectric layer. When a voltage is applied, the positive charge moves to the anode and the negative charge moves to the cathode, resulting in the buildup of electric potential on the plates. This potential, or capacitance, is then stored in the capacitor, allowing it to perform its designated application.

The 450LSU6800M77X170 aluminum electrolytic capacitor is used in a variety of applications in the engineering world. It is an ideal choice for cost-effective, low-voltage high-isolation applications, as its ESR rating is low and its leakage current is minimal. Its design and size make it suitable for use in electronic and electrical devices such as motor controllers, DSPs and power supplies, and can be used in a variety of signal integration and signal filtering applications.

The specific data is subject to PDF, and the above content is for reference