4609X-AP1-272LF

Number of Pins:	9
Height - Seated (Max):	0.200" (5.08mm)
Size / Dimension:	0.898" L x 0.098" W (22.81mm x 2.49mm)
Supplier Device Package:	9-SIP
Package / Case:	9-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4600X
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	8
Tolerance:	±2%
Resistance (Ohms):	2.7k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Resistor Networks, Arrays & 4609X-AP1-272LF

Resistor networks and arrays are electronic components that are designed to enable signals or currents to flow in certain directions in an electronic circuit. The use of resistor networks and arrays helps to create a balanced electrical circuit, reducing the possibility of issues such as overloading and power surges. This article looks at resistor networks and arrays and the specific application field and working principle of the 4609X-AP1-272LF resistor network.

Resistor Networks

Resistor networks are made of several resistors connected together in a variety of different ways. These networks are used to control the amount of electrical current or signal passing through a circuit, as well as to create a balanced circuit. They are available with many different configurations, each designed to suit a specific purpose.Resistor networks are encountered in many different electronic circuits. They can be used as a divider, allowing signals to be divided amongst multiple parts of a circuit, as well as a buffer, reducing large signals into more manageable sizes. The use of resistor networks is also important in analog circuits, as they are often used to prevent power surges and overloading.

Arrays

An array is a network of resistors that are linked together in some way. Arrays can be used in a variety of applications, such as signal reduction, signal division, and power control. They can also be used to create balanced circuits, helping to protect against power surges and overloading.The type of array used in a circuit depends on the specific purpose it needs to serve. Different arrays are designed for different types of circuits and will require different types of connectors to suit the circuit’s requirements.

4609X-AP1-272LF Resistor Network and Application Field

The 4609X-AP1-272LF resistor network from Vishay is an array of four resistors, featuring a 2.4kOhms total resistance value. It is designed for use in switching power supplies, LED drivers, general digital circuits, and communications circuits.The 4609X-AP1-272LF has a tolerance of 5%, is available in an industry-standard 0.2 inch x 0.2 inch package, and is able to operate at a maximum temperature of 125C. The 4609X-AP1-272LF is also rated for up to 100 volts of operation at frequencies up to 10MHz.

How the 4609X-AP1-272LF Array Works

The 4609X-AP1-272LF employs four resistors in an array configuration. The resistors are connected in series, connected by their opposite leads, and connected in parallel. This allows the four resistors to act as one resistor with a total resistance of 2.4kOhms. The amount of signal or current that passes through the 4609X-AP1-272LF is determined by the resistance value of each resistor. If one resistor is lower than the others, the signal or current will flow through the lower-resistance resistor. The use of different resistors helps to create a balanced electrical circuit, reducing the possibility of power surges and overloading.The 4609X-AP1-272LF is typically used in switching power supplies, LED drivers, and communications circuits as a signal reducer or signal divider. The resistor array also helps to suppress high-frequency noise in circuits, allowing for better signal transmission and reception.

Conclusion

Resistor networks and arrays are important components in many electronic circuits. They are used to control signal or current flow, create balanced circuits, and reduce the possibility of issues such as power surges and overloading.The 4609X-AP1-272LF resistor network is a specific type of resistor network that is designed for use in switching power supplies, LED drivers, and communications circuits. The 4609X-AP1-272LF is an array of four resistors, connected in series and in parallel, to create a total resistance of 2.4kOhms. The resistors in the array help to create a balanced electrical circuit, allowing for better signal transmission and reception.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description