4SEV100M5X5.5 Capacitors

Aluminum Electrolytic Capacitors have been a mainstay of electronic and electrical engineering since they were first developed in the 1930s. This type of capacitor consists of an anode of aluminum foil or graphite, a dielectric spacer, and a cathode of aluminum foil. It is possible to create capacitors of varying sizes, shapes, and capacitance values with this type of construction. In this article, we will discuss the application field and working principle of 4SEV100M5X5.5 Aluminum Electrolytic Capacitors.

Application Field of 4SEV100M5X5.5 Capacitors

4SEV100M5X5.5 Aluminum Electrolytic Capacitors are used in a variety of applications. They are commonly used as decoupling capacitors in power supply circuits, to reduce noise and ripple from power supplies. They are also used in motor speed control circuits as bypass capacitors to reduce motor noise and enhance motor performance. Furthermore, they are used as timing capacitors in time-delay circuits, and in transistor circuits to provide feedback. In addition, they are a popular choice for use in high voltage filtering circuits, especially in solar energy conversion, high voltage medical imaging, and nuclear radiation detection equipment.

Working Principle of 4SEV100M5X5.5 Capacitors

The 4SEV100M5X5.5 Aluminum Electrolytic Capacitors are based on the principle of charge separation, similar to other types of capacitors. This happens when electric charge is separated across two conductive surfaces, creating an electric field between them. This electric field causes an electrostatic attraction between the two charged surfaces, resulting in a polarized capacitor. The working principle is based on the fact that the electric charge is stored in the form of an electric field between the two plates of an Aluminum Electrolytic Capacitor.

When an electrical voltage is connected to the capacitor, the capacitance increases, creating a higher capacitance and allowing current to flow through the capacitor. This current is then used to charge the device and stored in the capacitance. When the voltage is removed from the capacitor, the stored charge begins to decrease, allowing the device to dissipate the stored energy.

The 4SEV100M5X5.5 Aluminum Electrolytic Capacitor is a reliable device that does not require as much current as other capacitors for the same capacitance. This makes it suitable for many applications, including battery backup, timing, power supply regulation, and general decoupling. In addition, the aluminum foil construction provides better corrosion protection than plastic or paper capacitors.