500MXG150MEFCSN22X55

Series:	MXG
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	150µF
Tolerance:	±20%
Voltage - Rated:	500V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	3000 Hrs @ 105°C
Operating Temperature:	-25°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	1.24A @ 120Hz
Ripple Current @ High Frequency:	1.736A @ 10kHz
Lead Spacing:	0.394" (10.00mm)
Size / Dimension:	0.866" Dia (22.00mm)
Height - Seated (Max):	2.244" (57.00mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can - Snap-In

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors are the most common capacitors found in electronic circuits. They are constructed from two aluminum foils, one a thin sheet with a thin oxide thin film layer on one side, while the other one is a thicker sheet. Between these two sheets there is an electrolyte, a solution of organic solvents and additives that contain dissolved salts. These components are laminated and rolled into a coil, which is then enclosed in a hermetically sealed aluminum can.These capacitors are used to store electrical energy in a form of static electricity, which can then be released in a very short period of time. The capacitor’s capacity (measured in Farads) and voltage handling ability (measured in volts) is determined by the surface area of the capacitor plates (foils) and the thickness of the electrolyte layer that separates them.The 500MXG150MEFCSN22X55 capacitor is an electrolytic capacitor that is commonly used in a variety of applications, including power supplies, audio amplifiers, and timers. It has a nominal capacitance of 500 μF at a maximum operating voltage of 150 VDC.In power supplies, this capacitor is used for storing and releasing energy, which helps reduce the ripple voltage present in the output of the supply. In general, it is used as a filter or a smoothing circuit which eliminates voltage spikes while providing a continuous output voltage.In audio amplifiers, this capacitor is used to reduce any ripple noise present. It is also used to increase the power supply rail voltage and to correct any output level mismatch between its two channels.In timers, this capacitor is used to provide an input/output current and therefore to regulate the timing element of the circuit. It helps to prevent any false triggering of the timer due to fluctuations in input voltage, and also helps to provide a consistent output voltage across the entire timing period.In all these applications, the working principle of 500MXG150MEFCSN22X55 capacitor is the same: it charges and releases energy at a given rate, as determined by its capacitance and the voltage level of the circuit in which it’s used. The capacitance of an electrolytic capacitor is determined by the sum of the capacitances of each of the capacitor’s plates and the distance between them. The voltage is a measure of the potential between the capacitor plates. The rate of charge and release is determined by the amount of current (Amperes) flowing through the capacitor, which is determined by the voltage of the circuit.In summary, aluminum electrolytic capacitors, such as the 500MXG150MEFCSN22X55 capacitor, are used in a variety of applications and are typically employed in power supplies, audio amplifiers, and timers. They are passive components that store and release energy at a given rate, which is determined by the capacitor’s capacitance and the voltage level of the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description