50TZV22M6.3X6.1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

The 50TZV22M6.3X6.1 is an aluminum electrolytic capacitor. It is a polarized capacitor that typically consists of two aluminum foil surfaces, each a different polarity. One foil acts as the anode, the other as the cathode. The two aluminum foils are separated and insulated by a di-electric material, either an organic solid compound (paper) or a non-solid compound (liquid). This di-electric material is important for dielectric absorption, also known as dielectric aging. The electrolyte acts as the dielectric, which gives the capacitor its capacitance and a relatively high current to voltage ratio.

The 50TZV22M6.3X6.1 aluminum electrolytic capacitor is designed for applications that make use of a combination of low impedance, high ripple currents, high temperature withstand capabilities and long life. This type of capacitor is usually used in various areas such as industrial, medical, and military applications. Its primary application areas include power supply systems, audio equipment, automotive and security systems.

Aluminum electrolytic capacitors are also used in various areas as DC decoupling, blocking, and powering. DC decoupling involves creating an AC voltage to separate the voltage components, which, depending on the circuit, can be at different frequencies. Blocking is for capacitors that block DC voltages of certain frequencies, such as a bias voltage of an amplifier. And powering is for when the capacitor is connected to a power supply. This connection enables the storage and transfer of the power from output to input.

The working principle of aluminum electrolytic capacitors involves the process of electrolysis. This is where a voltage is being applied to the two aluminum foils, which act as the cathode and anode respectively. As current passes between the two electrodes, an electrochemical reaction occurs. Both electrodes are covered in a layer of aluminum oxide, which acts as an insulator and reduces the charges exchanged - ultimately, providing the capacitor its capacitance.

The electrolysis process also causes the capacitor\'s capacitance and current-voltage ratio to decrease over time. This phenomena is known as dielectric aging. This is because the aluminum oxide coating wears away as electrons move through the capacitor and the voltage across the capacitor decreases. The rate of this wear is influenced by the temperature, frequency of operation, time, and current.

In general, 50TZV22M6.3X6.1 aluminum electrolytic capacitors are used in both AC and DC circuits. In AC circuits, they can be used for coupling, de-coupling, and blocking. In DC circuits, these capacitors are mainly used for filtering, voltage regulator, and decoupling. Additionally, these capacitors are often used as a voltage-stabilizing circuit for industrial and medical equipment. They are also frequently used as an energy storage transducer to reduce the power consumption of electronic devices.

The specific data is subject to PDF, and the above content is for reference