50YXG680MEFC12.5X30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of capacitor that uses an aluminum oxide layer as the dielectric material for electrostatic energy storage. These capacitors are commonly used in power electronics, electronic circuits, and various consumer electronic devices. The 50YXG680MEFC12.5X30 is an aluminum electrolytic capacitor typically used in switching supplies. This article will discuss the application fields and working principles of the 50YXG680MEFC12.5X30.

The 50YXG680MEFC12.5X30 is typically used in high-voltage and medium-voltage applications, such as those that require step-up and step-down DC to AC conversion. They are suitable for use in inverters, switching regulators, and other power conversion equipment. This capacitor is often used in high power applications either as a primary rectifier filter or as part of a snubber circuit. It is also useful for filtering in the low frequency power supplies where lower ripple current is required.

The 50YXG680MEFC12.5X30 has a capacitance of 680 milli Farads and a rated voltage of 12.5 volts. It is a polarized capacitor, which means it must be connected with correct polarity in order to work properly. Its ripple current, which is peak-to-peak fluctuations in the direct current voltage or current, is 8.8 amps. Its ESR, or Equivalent Series Resistor is 30 milli Ohms. Finally, its capacitance tolerance is -20% to +80%.

The working principle of the 50YXG680MEFC12.5X30 is the same as that of other aluminum electrolytic capacitors. It consists of a core that is an anode made of aluminum foil insulated with a layer of metal oxide. The cathode is an anode made of aluminum foil. When the circuit is energized, electrons flow from the positive to the negative electrode, creating a current. This current then causes electricity to flow between the terminals of the capacitor, thus storing energy.

The construction of the 50YXG680MEFC12.5X30 also makes use of specialized internal connections that allow for improved performance. Internally, the anode and cathode are connected with a printed circuit board. This allows for a longer life cycle and improved reliability. Additionally, the aluminum foil of the anode and cathode are wrapped around an electrolytic paper that helps increase ripple current and reduce ESR.

The 50YXG680MEFC12.5X30 is an aluminum electrolytic capacitor that is typically used in power electronics and various consumer electronic devices. It is useful for step-up and step-down DC to AC conversion and for filtering in low-frequency power supplies. It has a capacitance of 680 milli Farads, a rated voltage of 12.5 volts, and a ripple current of 8.8 amps. The internal construction of the capacitor makes use of a printed circuit board and an electrolytic paper that help improve its performance. Knowing its application fields and working principles will help you make an informed decision when choosing an aluminum electrolytic capacitor.

The specific data is subject to PDF, and the above content is for reference