511D108M035EK4D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are one of the most common passive components used in circuit boards today. The product code 511D108M035EK4D is an aluminum electrolytic capacitor from a major component supplier specializing in capacitors, and falls under this broad umbrella of components. This article describes the application field and working principle of the 511D108M035EK4D capacitor. A capacitor is circuit component that stores an electrical charge and is used to provide a brief period of electrical energy when the normal power supply is not available. In its most basic form, a capacitor consists of two conductive plates separated by a non-conductive material. An aluminum electrolytic capacitor is similar to a disk capacitor, except that the dielectric material between the two conductive plates is a thin oxide layer formed on the aluminum. The conductive plates are called the anode and cathode, and they are connected together by the electrolyte.The 511D108M035EK4D aluminum electrolytic capacitor can store up to 108µF of charge with a maximum voltage rating of 35V and a maximum operating temperature of 85°C. The 511D108M035EK4D has a ripple current rating of 4A and a low impedance. This part is also very small, measuring only 8mm in diameter and 12mm in length. The 511D108M035EK4D is designed for use in filter circuits, which require high capacitance values and voltages. This part commonly used in audio equipment, power supplies, and motor control applications. It is also used for signal filtering, decoupling, stability, and dynamic braking. The current rating of the 511D108M035EK4D is an important determining factor of how long the capacitor can be charged and discharged. The lower the current rating, the less energy the capacitor can hold, and the more likely it is to fail. In some applications, the current rate of the capacitor needs to be carefully calculated to ensure the capacitor can handle the expected load.When power is applied to the 511D108M035EK4D, an electric field is created between the anode and cathode plates. This field builds up the oxide layer between the plates and allows the capacitor to store energy. When the power is removed, the field quickly dissipates and returns the energy stored in the capacitor back to the circuit. This charging and discharging process takes place very quickly, allowing the capacitor to act as a filter between the power source and the load.To ensure maximum performance and reliability, aluminum electrolytic capacitors require special handling. They can be damaged if they are exposed to too much voltage or heat, and they should not be stored for extended periods of time under high temperatures or humidity. To prolong the life of the 511D108M035EK4D, it is important to properly attach the leads and use a suitable heat sink if the temperature approaching the capacitor\'s maximum operating temperature.In summary, the 511D108M035EK4D aluminum electrolytic capacitor is a useful component for both audio and power supply applications. It offers high capacitance ratings, low impedance, and current ratings suitable for most applications. With proper handling, this capacitor is reliable and able to provide consistent performance in most circuits.

The specific data is subject to PDF, and the above content is for reference