515D225M400CC6AE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors have been used extensively in many applications from consumer electronics to industrial instruments. The 515D225M400CC6AE3 aluminum electrolytic capacitors are no exception to that. In this article, we will discuss the application fields and working principle of this particular series of aluminum electrolytic capacitors.

An aluminum electrolytic capacitor is composed of two aluminum foils with an electrolyte between them and paper separating them. One of these pieces of aluminum is etched with a very small number of squares where the electrochemical reaction occurs. The other piece of aluminum is laid flat with an electrolyte solution sandwiched in between. This set up forms the dielectric between the two pieces of aluminum and acts as an insulator, allowing electrical currents to flow but preventing the current from losing its direction. The electrolyte also prevents the formation of an oxide layer, allowing the capacitor to operate efficiently in high voltage environments.

The 515D225M400CC6AE3 aluminum electrolytic capacitors have an operating temperature range of -40°C to 105°C. They have a capacitance of 400μF and a long life electrolyte. The capacitors have a short circuit current rating of 50A for a 10 second duration, with a rated voltage of 25V DC. They have a low ESR rating of 0.31 Ohms and a ripple current rating of up to 6Amps.

The 515D225M400CC6AE3 aluminum electrolytic capacitors are widely used in various types of power supply designs. They are used for transient suppression, high-frequency filtering, and line filtering. They can also be used for DC-DC converters, motor drivers, and LED drivers. They are also used in commercial and industrial applications such as frequency meters, oscilloscopes, and many other types of test instruments.

The 515D225M400CC6AE3 aluminum electrolytic capacitors have a unique construction and operating principle. The etched surface of the electrodes is called the anode, while the flat surface is called the cathode. The electrolyte forms the dielectric between the two electrodes and allows current to pass through. However, the voltage between the two electrodes is limited to the electrolyte\'s breakdown voltage, preventing the capacitor from exploding when too much current is drawn. Once electricity reaches the capacitor, it is stored momentarily in the form of an electrostatic field. This field then dissipates over time, allowing new charge to take its place.

The 515D225M400CC6AE3 aluminum electrolytic capacitors are perfect for applications requiring reliable and consistent performance. They are an ideal choice for power supply designs that require both high voltage rating and long life electrolyte. The low ESR and ripple current ratings further ensure that the capacitors will provide reliable performance for many years to come.

The specific data is subject to PDF, and the above content is for reference