63YK47M6.3X11

Series:	YK
Part Status:	Active
Lead Free Status / RoHS Status:	--
Capacitance:	47µF
Moisture Sensitivity Level (MSL):	--
Tolerance:	±20%
Voltage - Rated:	63V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	2000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	190mA @ 120Hz
Ripple Current @ High Frequency:	285mA @ 10kHz
Lead Spacing:	0.098" (2.50mm)
Size / Dimension:	0.248" Dia (6.30mm)
Height - Seated (Max):	0.492" (12.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors (also known as electrolytic capacitors or aluminum electrolytic capacitors) are passive devices that contain an electrolyte, typically an oxide-based solution, that can store an electrical charge. They are commonly used for filtering, smoothing, and bypassing electronic circuits. Aluminum electrolytic capacitors are characterized by high capacitance and high thermal stability. The 63YK47M6.3X11 aluminum electrolytic capacitor is a capacitor with a capacitance of 47µF and a voltage of 6.3V. In this article, we will discuss the application field and working principle of the 63YK47M6.3X11 aluminum electrolytic capacitor.

Applications

The 63YK47M6.3X11 aluminum electrolytic capacitor is mainly used for filtering, smoothing, and bypassing electronic circuits. It is used in power supplies and filters, audio amplifiers, inrush limiters, charge pumps, PWM regulators, motor drives, digital signal processers, and other applications that require low-loss capacitors with high capacitance and a low ESR.

Construction

The 63YK47M6.3X11 aluminum electrolytic capacitor consists of two aluminum plates and a non-polarized electrolyte. The two aluminum plates are insulated from each other by a layer of oxide film, which acts as a dielectric material. The electrolyte is typically an aqueous solution of an inorganic salt, such as sulfuric acid, that is able to conduct electricity. One of the aluminium plates is connected to the cathode, while the other is connected to the anode.

Working Principle

When an electrical current is applied to the 63YK47M6.3X11 aluminum electrolytic capacitor, the electrolyte conducts electricity, allowing the electrical charge to travel through the oxide layer between the two aluminum plates and form an electric field. This electric field causes a buildup of charge on the oxide layer, creating an electric potential. The electric potential causes an electric current to flow through the electrolyte, creating a flow of charge from the cathode to the anode, which creates a capacitor action. This capacitor action allows the capacitor to store electrical energy until it is discharged.

Conclusion

The 63YK47M6.3X11 aluminum electrolytic capacitor is an electrolytic capacitor with a capacitance of 47µF and a voltage of 6.3V. It can be used for filtering, smoothing, and bypassing electronic circuits. The 63YK47M6.3X11 aluminum electrolytic capacitor consists of two aluminum plates and a non-polarized electrolyte. When an electrical current is applied to the capacitor, the electrolyte conducts electricity, allowing the electrical charge to travel through the oxide layer between the two aluminum plates and form an electric field, which creates a capacitor action and allows the capacitor to store electrical energy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description