672D476H025CC5I

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are capacitors that are constructed with an oxide layer on the surface of an anode made of aluminum. This oxide layer serves as a dielectric and when a voltage is applied, the capacitor stores electrical energy in an electric field. The 672D476H025CC5I is a type of aluminum electrolytic capacitor, and it is widely used in power control circuits, signal filtering, timing circuits, noise reduction and various other applications.

An aluminum electrolytic capacitor consists of two electrodes, one positive and one negative. The anode, or positive pole is composed of an aluminum foil. The layer of aluminum oxide on the surface of the foil acts as an insulator and dielectric between it and the electrolyte. The size, shape, and composition of the electrolyte used can vary, but is typically composed of an aqueous solution of boric acid, propylene carbonate, or ethylene carbonate.

The 672D476H025CC5I capacitor is a polarized electrolytic capacitor. It is composed of a spiral of aluminum foil as the anode, a layer of electrolyte, a layer of activated carbon as the cathode, and a plastic sleeving. It is also constructed with two terminals that are then connected to the two electrodes. The positive terminal is connected to the anode and the negative terminal is connected to the cathode.

The 672D476H025CC5I capacitor has a wide range of applications. It is commonly used in power control circuits, signal filtering circuits, timing circuits, noise reduction, and various other electronic applications. It is usually found in TVs, monitors, amplifiers, radio receivers, and other consumer electronics.

The 672D476H025CC5I capacitor works by discharging a fixed amount of current when a voltage is applied to the terminals. When a voltage begins to flow, the electrolyte in the capacitor absorbs the current and releases energy. This energy is then stored in the electric field between the two electrodes. When the voltage is removed, the capacitor is connected to a source and the electric charge is released slowly, thus allowing the capacitor to reset and begin functioning again.

The 672D476H025CC5I capacitor is a highly reliable and durable component. It is available in sizes ranging from 0.1 to 2000 microfarads and can handle voltage ratings up to 600 volts. It is also suitable for operating temperatures between -55°C and +105°C. It is widely used in a variety of electronic applications and circuity due to its good performance, high efficiency, and long life.

In conclusion, the 672D476H025CC5I capacitor belongs to the aluminum electrolytic capacitor family. It is used in power control circuits, signal filtering, timing circuits, noise reduction, and various other applications and is a highly reliable and durable component that is suitable for use in a wide range of temperatures.

The specific data is subject to PDF, and the above content is for reference