74HCT191D,652

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74HCT191D,652 is a logic device that is typically used in counters, dividers, and most commonly in clocking applications. It is a Binary Ripple Carry Counter that is capable of counting in both directions and can also operate in synchronous or asynchronous mode.

The 74HCT191D,652 is made up of two 8-bit binary ripple carry counters and can count up to a maximum of 2^16-1 or 65535. It is composed of a combination of logic gates, flip-flops, and decoder logic, which allows it to perform its counter functions with minimal setup time. The device is designed with a combination of open collector input and active high or low outputs and can be used in both single-stage or multi-stage counting.

In terms of its application field, the 74HCT191D,652 is primarily used in clock pulse generation and frequency division. The device is ideal for applications which require high speed and low power requirements. The device can be used to create a wide range of frequencies through varying duty cycles and can also be used to maintain a synchronized clock.

The 74HCT191D,652 operates using an asynchronous reset, meaning that when the device is powered on, it will start counting at 0. This makes the device ideal for applications where the output needs to start at a known value each time the power is turned on. The device has the ability to operate in synchronous mode as well, allowing it to be used in applications where it needs to match up with an incoming clock signal.

The 74HCT191D,652 also has the ability to operate in multiplexed mode, meaning that it has the ability to count up to its maximum value and then reset itself. This allows the device to be used in applications where multiple counters need to be run together, such as for counting up or down in a linear fashion.

The 74HCT191D,652 is designed to be a low power device with a very small footprint and requires just two supply voltages to operate. The device is also designed with built-in ESD protection to protect against static electricity damage.

In terms of its working principle, the 74HCT191D,652 works by creating an output signal based on produced by an input signal. The input signal triggers the device to start counting up or down, depending on what the direction is set to. The number of counts is controlled by a pre-set frequency, allowing the output to be set to a specific rate, frequency, or duty cycle.

The device is typically used in clocking applications and is ideal for applications where a great deal of precision is required. The device is also commonly used for applications such as traffic timing and light sequencing.

The 74HCT191D,652 is designed to count up or down reliably and quickly, with minimal input power requirements. The device operates in both asynchronous and synchronous modes and can be used for applications where count timing needs to match an external clock signal. The device is also designed with built-in ESD protection to protect against static electricity damage.

The specific data is subject to PDF, and the above content is for reference