80LSW56000M77X121

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of capacitor that uses aluminum oxide with very thin and porous surfaces to store electrical energy, much like most other capacitors on the market. The 80LSW56000M77X121 is a specific aluminum electrolytic capacitor, designed with various parameters to meet specific application fields and needs. This article will discuss the application fields and working principle behind the 80LSW56000M77X121.

Unlike most other capacitors which are constructed with a small layer of paper or plastic, aluminum electrolytic capacitors use aluminum oxides. These oxides are extremely thin and porous, which allows for the capacitor to store a larger amount of electrical charge over a smaller area. This makes the capacitance much higher, usually ranging from 1μF to 10,000μF.

The 80LSW56000M77X121 is a special type of aluminum electrolytic capacitor from the “80LSW” series, designed for specific application fields such as power supply filtering, signal input/output filtering, and antenna signal suppression. The 80LSW56000M77X121 has a maximum operating voltage of 180V AC and a rated ripple current of 5400mA, creating a higher amount of available current for use in various applications.

The working principle behind aluminum electrolytic capacitors is quite simple. When a voltage is applied between the anode and the cathode, it creates a chemical reaction resulting in an electrostatic field. This field causes electrons to flow between the two electrodes and move through the aluminum oxide. In this manner, the electrons are stored and released as needed, making the capacitor a reliable energy storage and output device.

The 80LSW56000M77X121 has a wide variety of use in many different contexts. It is used for power supply filtering and stabilizing in control systems, where an orderly voltage and current output is required. It is also used for input/output filtering of oscillators, on-board attenuators, and antenna signal suppression. Additionally, it can be used in circuits requiring a higher current draw, as the 80LSW56000M77X121 is capable of providing up to 5400mA.

In conclusion, the 80LSW56000M77X121 is a special aluminum electrolytic capacitor, designed to meet specific application fields and needs. It is a reliable source of electrical energy storage and output, with a high ripple current of 5400mA, making it suitable for use in various applications. Its typical usage includes power supply filtering, signal input/output filtering, and antenna signal suppression.

The specific data is subject to PDF, and the above content is for reference