865230640007

Polarization:	Polar
Package / Case:	Radial, Can - SMD
Mounting Type:	Surface Mount
Surface Mount Land Size:	0.169" L x 0.169" W (4.30mm x 4.30mm)
Height - Seated (Max):	0.217" (5.50mm)
Size / Dimension:	0.157" Dia (4.00mm)
Lead Spacing:	--
Ripple Current @ High Frequency:	21mA @ 10kHz
Ripple Current @ Low Frequency:	14mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	WCAP-AS5H
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	5000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	50V
Tolerance:	±20%
Capacitance:	3.3µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IntroductionAluminum Electrolytic Capacitors, also known as “capacitors”, are small devices typically used for electrical energy storage. Designated with the prefix “865230640007”, these capacitors are known for their ability to help dissipate interference from signals crossing through complex systems. This article will explore the application fields and working principles of these capacitors, as well as consider their implications in the electrical engineering world.Application FieldsAluminum electrolytic capacitors’ primary application field is in providing energy storage and filtering in a variety of electronic circuits. These capacitors are essential components in the power-supply stages and signal filters of virtually all electronic equipment. They are also commonly found in applications such as coupling and decoupling of low and high frequencies, resonant circuits, energy storage, shooting suppression, and smoothing. In addition to this, they are also used in the fields of light bulbs, photocopiers, switch mode power supplies, motor drives, and noise suppression.Working PrincipleAluminum electrolytic capacitors are constructed from two conductive plates and an electrolyte in between. A dielectric insulator separates the anode and the cathode which are placed in contact with an electrolyte. When a potential difference is applied across the capacitor, a current flows through the electrolyte. This in turn forms a thin layer of oxide on the plates which acts as the capacitor’s dielectric material.Aluminum electrolytic capacitors have a high capacitance-to-volume ratio compared to other types of capacitors. This is due to their thin oxide layer and the relatively high amount of surface area exposed to the electrolyte. This allows for an increased energy storage capability, making aluminum electrolytic capacitors the type of choice for signal filtering applications.ImplicationsAluminum electrolytic capacitors are essential components in the circuitry of modern electronics. Their importance lies in their ability to supply a consistent and reliable power source while also helping to filter out noise between signals. As such, these components are found in almost all electronic devices as they are essential for the functioning of the device.Moreover, aluminum electrolytic capacitors are also becoming increasingly popular in the research and development world. This is due to their increased capacity to hold charge and their relatively low cost. As the demand for electronics and products with complex circuitry increases, so too does the need for reliable and effective capacitors.ConclusionIn conclusion, aluminum electrolytic capacitors with the prefix “865230640007” are important application components for a variety of electrical engineering needs. They are most commonly used for energy storage and filtering as well as noise suppression and can be found in many consumer electronics. Additionally, aluminum electrolytic capacitors are also used in research and development due to their increased capacity and lower cost.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description