93C56-E/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 93C56-E/P is a type of memory chip from Microchip and is widely used within the industrial world. It is a 16Kb Serial Electrically Erasable Programmable Read-Only Memory (EEPROM) and is commonly used for data storage and for code development. It features 16 Kbits of code storage in a 9X9 X4 matrix, a maximum write time of 5ms, and a maximum write voltage of 5.5Vdc.

The 93C56-E/P is highly preferred as it is relatively small compared to other EEPROMs, possesses excellent compatibility with digital systems and provides increased system performance.

The 93C56-E/P can be used in a variety of applications, such as data and parameter storage applications, such as automotive engine, transmission, and ABS control units. It can also be used in energy metering and industrial process control applications, as well as in both embedded control and navigation systems. The 93C56-E/P can be used in other electronic configurations such as embedded microcontrollers, field-programmable gate arrays, and in embedded applications.

Working Principle of the 93C56-E/P

The 93C56-E/P is an EEPROM, it uses a combination of CMOS transistors, MOSFETs and diodes which is essential to its functionality. The 93C56-E/P has 2 main components, the main memory array and the control registers. The main memory array is used for storing data and code. The control register provides the chip with certain functions such as providing enhanced instruction decode and address generation, and for programming and erasing.

The 93C56-E/P uses a Charge Pump Circuit, which provides the chip with two distinct voltages necessary for the programming and erasing functions. To program the 93C56-E/P, the voltage is first applied to the control register, which sets the correct voltage levels to program the memory. This voltage applied to the source lines which connect to each bit in the memory array.

To erase the 93C56-E/P, the voltage is first applied to the control register and the voltage is then applied to the drain lines of the memory array, which applies a negative voltage to the source lines. This negative voltage is then combined with the programming signal, which causes the charge stored in the memory cells to be discharged and the cells are then reset to their powered-down state.

The 93C56-E/P is highly preferred in the industrial world due to its size, excellent compatibility with digital systems, efficient programming and erasing functions and its enhanced system performance. The 93C56-E/P is an excellent choice for applications requiring a small EEPROM with reliable code storage.

The specific data is subject to PDF, and the above content is for reference