93C56B-E/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

93C56B-E/P is a type of Electrically Erasable Programmable Read-Only Memory (EEPROM), also known as flash memory. It is a non-volatile memory which means that it holds its contents indefinitely regardless of power supply. The 93C56B-E/P offering 16K-bit of storage and is organized into 128 128×8 word blocks. It is a serial EEPROM, meaning that it can be daisy chained together with other memory devices due to its serial interface.

Due to its easy-to-use and non-volatile characteristics, the 93C56B-E/P is used in a variety of applications. It is commonly used for parameter storage, such as user configuration, system settings, and program data. It can also be used as an interface buffer to other devices, such as addressable EEPROM, serial EEPROM, non-volatile RAM, and I/O devices. Additionally, it is often used in the programming of microcontrollers, particularly for saving configuration data before going into low-power modes.

The 93C56B-E/P EEPROM has an SPI-compatible serial interface, meaning that data is transferred between the device and the microcontroller via a serial bus. It requires a clock signal which is provided by the microcontroller. The 93C56B-E/P also has an enable/disable signal which is used to enable or disable the communications when programming or writing to the EEPROM. Once enabled, data is written to the EEPROM in a serial format, with each bit being transferred on the clock signal. Writing to the EEPROM is performed by first sending the memory word or byte address, followed by up to 128 bytes of data.

The 93C56B-E/P can be programmed and erased using a special programming/erasing controller, such as a Microchip PIC16F890, or by using an external programmer. Programming is done by first setting the EEPROM to the programming voltage for the duration of the programming cycle. This voltage prepares the EEPROM for programming by temporarily erasing all the contents of the memory. Once erased, the data is written to the EEPROM using the data on the input port. Data can be written to the EEPROM one byte at a time, or up to 128 bytes can be written in one operation. Once the programming is complete, the EEPROM is reset to the normal operation voltage.

Erasing the EEPROM requires a higher voltage than the programming voltage. This voltage is provided by the EEPROM\'s internal circuitry. It is important to note that the erase voltage must be applied to the device for the full duration of the erase cycle or the EEPROM may not be completely erased. The erase cycle must also be performed in the presence of the programming voltage so that the processor can continue writing to the device while the erase cycle is taking place.

In summary, the 93C56B-E/P is a 16K-bit EEPROM which is commonly used for parameter storage and interface buffer to other devices. It is programmed and erased using either an external programmer or a PIC16F890. It has an SPI-compatible serial interface and transfers data between the EEPROM and microcontroller using clock signal from the microcontroller. The 93C56B-E/P is a non-volatile memory and its contents are retained even without power supply.

The specific data is subject to PDF, and the above content is for reference