93C86C-I/P

Series:	--
Packaging:	Tube
Part Status:	Active
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	16Kb (2K x 8, 1K x 16)
Clock Frequency:	3MHz
Write Cycle Time - Word, Page:	2ms
Memory Interface:	SPI
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-PDIP
Base Part Number:	93C86C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

93C86C-I/P Memory

Memory is an essential component in any modern computer system. The 93C86C-I/P is a serial electrically erasable programmable read-only memory (EEPROM) that provides easy, reliable and flexible non-volatile memory storage. This memory solution is popular in a variety of applications such as automotive and industrial control systems, automotives, medical, consumer, and communication systems.The 93C86C-I/P is a 16 pin device and has a wide operating voltage range of 2.0 to 5.5 V. It has a 128-byte memory capacity which is accessible in 8-bit increments and can be configured for read, write or erase operations. In addition, 93C86C-I/P supports both byte- and page-oriented Serial Peripheral Interface (SPI) and supports up to 1MHz operations. One of the most attractive features of the 93C86C-I/P is the use of removable terminal blocks. These special terminal blocks have been designed specifically for the 93C86C-I/P and provide reliable connection to the chip. This makes insertion and removal of the device convenient and trouble-free. The 93C86C-I/P is a very reliable and precise device. It has an internal write protection feature and is capable of protecting up to 64-bytes of data. In addition, it offers a wide range of features such as an 8-bit address and data bus, a two-wire serial interface, nonvolatile storage, strong noise immunity, and a low power operation mode.The 93C86C-I/P is a non-volatile memory and works in two-wire serial modes of communication. It is able to communicate in both full and half-duplex modes at data rates up to 1MHz. The device is able to write and read data in serial format, with the least significant bit (LSB) first.When the 93C86C-I/P is first powered up, it is in the standby state and will not respond to any signals until one of the following commands is sent: a write command, a read command, or an erase command. In order to write to the device, the write command must be sent first. This command will cause the device to enter write mode, and the data to be written must then be sent. The read command will cause the device to enter the read mode, and the address of the data to be read must then be sent. Finally, the erase command will cause the device to enter the erase mode, and the address of the data to be erased must then be sent.The device is also capable of operating in low-power mode. This mode is enabled when the device is not actively transferring data and requires the write, read, or erase commands to be sent each time the device is to be used. The 93C86C-I/P is widely used in automotive and industrial control systems, consumer electronics, telecommunications, and medical applications. It is ideal for data storage, configuration storage and device identification applications. Its low power consumption and reliable operation make it a viable option for any system designer. In conclusion, the 93C86C-I/P is a reliable and efficient memory device for a variety of applications. Its low power consumption, flexible configuration options, and wide operating voltage range make it ideal for a number of applications. With its wide range of features and advantages, the 93C86C-I/P provides an ideal solution for storing, configuring, and monitoring data.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description